The Genie 49410GT is a genuine OEM Flat Washer, M12 designed for a wide range of Genie telescopic boom lifts, articulating boom lifts, trailer-mounted booms, and GTH telehandlers. As a factory-sourced component, this washer meets the exact dimensional and material standards specified for these machines. It fits an extensive lineup including S and Z series booms, GTH telehandlers, and TMZ trailer-mounted articulating booms — cross-reference part number 49410GT against your parts manual to confirm the correct application for your unit. Stocking a spare helps keep routine service and repair work on schedule.
Key Features
- Genuine OEM Material Grade — Sourced directly from Genie, this flat washer meets the exact M12 dimensional tolerances required for proper load distribution and fastener retention in Genie assemblies.
- Direct Hardware Replacement — Designed to drop into existing bolt assemblies without rework, maintaining correct clamp load and surface contact across fastened joints.
- Broad Verified Fitment — Compatible with Genie S and Z series boom lifts, GTH telehandlers, and TMZ trailer-mounted booms, covering a wide range of models in active fleet use.
- Protects Mating Surfaces — Distributes fastener load across a wider bearing area, preventing pull-through and surface damage on structural and mechanical joints during torquing and long-term service.
- Structural Integrity at Every Service Interval — On aerial lifts and telehandlers, fastener hardware that meets spec is critical to maintaining the structural reliability of booms, frames, and platform attachments — using the correct OEM washer supports that standard.
A flat washer serves a straightforward but essential role in any bolted assembly: it spreads the clamping force of a nut or bolt head across a broader surface area, protecting the material beneath and ensuring the fastener maintains its holding strength over time. On machines like telescopic and articulating boom lifts and telehandlers — where structural joints, pivot points, and hydraulic component mounts are subject to constant vibration and dynamic loads — using a washer of the correct size and material grade is not a minor detail. When a washer is undersized, deformed, or missing, fasteners can loosen prematurely or damage the surfaces they bear against, leading to joint failure that requires more extensive repair.
Part Details
| Part Number | 49410GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Flat Washer, M12 |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-100HD | S-100HD |
| S-120HD | S-120HD |
| S-40 | S-40 |
| S-45 | S-45 |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-60 FE Hybrid | S-60 FE Hybrid |
| S-60 DC | S-60 DC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-3800 | S-3800 |
| S-3200 | S-3200 |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GTH-636 | GTH-636 |
| GTH-844 | GTH-844 |
| GTH-1056 | GTH-1056 |
| GTH-1256 | GTH-1256 |
| GTH-1044 | GTH-1044 |
| GTH-1244 | GTH-1244 |
| GTH-1544 | GTH-1544 |
| TMZ-34/19 | TMZ-34/19 |
| TMZ-50/30 | TMZ-50/30 |
| TMZ-17/10 | TMZ-17/10 |
| Z-135/70 | Z-135/70 |
| Z-51/30J | Z-51/30J |
| Z-62/40 | Z-62/40 |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
