The Genie 75144GT is a genuine OEM Flat Washer, M6 PLTD.FW designed for a wide range of Genie and Terex equipment, including AL and RL series light towers, S-series telescopic boom lifts, GTH telehandlers, GR and GRC vertical mast lifts, AWP and IWP Super Series personnel lifts, and QS material lifts. As a factory-sourced component, this washer matches the exact plating specification, outer diameter, and thickness required by the original design — ensuring it seats and functions correctly right out of the box. Cross-reference part number 75144GT against your machine's parts manual to confirm the correct application before ordering.
Key Features
- OEM-Correct Plating and Dimensions — Manufactured to the exact M6 plated specification, this washer delivers the correct load distribution and corrosion resistance the original design calls for — not an approximation.
- Direct Drop-In Installation — Sized to fit the original fastener hardware without reworking bolt patterns or adjacent components, making replacement straightforward on any compatible machine.
- Broad Fitment Across Genie and Terex Lines — Compatible with AL and RL light towers, S-series and S HD telescopic booms, GTH telehandlers, GR and GRC vertical mast lifts, QS stock-pickers, AWP and IWP Super Series personnel lifts, and Super-Straddle material lifts.
- Protects Fastener Integrity Under Load — A correctly fitted flat washer distributes clamping force evenly across the mating surface, preventing fastener pull-through, surface damage, and loosening under vibration over time.
- Sourced Directly from Genie — Genuine OEM origin means this part carries the same quality validation as the hardware originally installed at the factory, giving you full confidence in the component you are putting on the machine.
A flat washer serves as a load-spreading interface between a fastener — typically a bolt or nut — and the surface it is clamping against. By distributing the clamping force across a larger area, the washer prevents the fastener from pulling through or damaging softer materials and helps maintain consistent clamp load over the life of the joint. On equipment that operates under vibration and variable loads, such as aerial lifts, light towers, and telehandlers, a missing or incorrect washer can cause fasteners to work loose or allow surface wear that eventually compromises the connection. Replacing a worn or missing washer with the correct plated M6 specification restores the joint to its intended clamping performance.
Part Details
| Part Number | 75144GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Flat Washer, M6 PLTD.FW |
Compatibility & Fitment
| Name | Model |
|---|---|
| AL4000 | AL4000 |
| AL5000 | AL5000 |
| TML-4000 | TML-4000 |
| TML-4000N | TML-4000N |
| RL4000 | RL4000 |
| AL5 with Vertical Mast | AL5 with Vertical Mast |
| RL4 Vertical Mast | RL4 Vertical Mast |
| RL4 LED Vertical Mast | RL4 LED Vertical Mast |
| AL4 | AL4 |
| RL4 | RL4 |
| AL5 | AL5 |
| AL4L | AL4L |
| AL5L | AL5L |
| AL5HT | AL5HT |
| AWP Super Series | AWP Super Series |
| GRC-12 | GRC-12 |
| Super-Straddle | Super-Straddle |
| IWP Super Series | IWP Super Series |
| GR-12 | GR-12 |
| GR-15 | GR-15 |
| GR-20 | GR-20 |
| QS-12R | QS-12R |
| QS-15R | QS-15R |
| QS-20R | QS-20R |
| QS-12W | QS-12W |
| QS-15W | QS-15W |
| QS-20W | QS-20W |
| AWP Super | AWP Super |
| CWP Super Series | CWP Super Series |
| GR-8 | GR-8 |
| S-100HD | S-100HD |
| S-120HD | S-120HD |
| S-3800 | S-3800 |
| S-3200 | S-3200 |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GTH-1048 | GTH-1048 |
| GTH-1056 | GTH-1056 |
| GTH-844 | GTH-844 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
