The Genie 6036GT is a genuine OEM Lock Washer,.625 PLTD, built for a broad range of Genie aerial work platforms including telescopic and articulating boom lifts, scissor lifts, and personnel lift equipment. As a factory-sourced component, this washer is produced to the same specifications as the hardware installed at the time of manufacture, ensuring consistent performance across every application it serves. Cross-reference part number 6036GT against your parts manual to confirm fitment for your specific unit before ordering. This washer fits an extensive lineup including Genie GS scissor lifts, S and SX telescopic booms, Z and ZX articulating booms, IWP personnel lifts, and Genie Superlift and Powered Superlift material lifts.
Key Features
- Genuine OEM Hardware Grade — Sourced directly from Genie, this lock washer meets the exact plating and dimensional tolerances used in original machine assembly, delivering consistent clamping integrity across fastener joints.
- Drop-In Replacement — Sized to match the original .625 PLTD specification, this washer seats correctly on existing hardware without rework or additional modification to mating fasteners.
- Wide Cross-Platform Fitment — Compatible with Genie GS scissor lifts, S and SX telescopic boom lifts, Z and ZX articulating boom lifts, IWP lifts, and Genie Superlift and Powered Superlift units — a single part across a large mixed fleet.
- Prevents Fastener Back-Out — The lock washer's hardened, plated construction bites into mating surfaces under torque load, resisting vibration-induced loosening that can compromise structural and mechanical connections.
- Corrosion-Resistant Plating — The zinc plating finish provides a barrier against moisture and jobsite contaminants, extending the service life of the fastener joint in outdoor and variable-weather operating conditions.
- Critical Joint Integrity on Aerial Equipment — On boom lifts and scissor lifts, fastener security at structural and mechanical connection points is directly tied to safe machine operation; using the correct OEM-spec washer ensures joints are maintained as originally engineered.
A lock washer is a hardened fastening component placed beneath a nut or bolt head to prevent the fastener from rotating loose under vibration or dynamic load. On aerial work platforms — which experience continuous movement, extension cycles, and load shifts — even minor fastener loosening at structural or mechanical joints can lead to accelerated wear or connection failure. Replacing a worn or missing lock washer with the correct OEM-specification part restores the clamping load the joint was designed to maintain, keeping hardware secure across the machine's full range of operation.
Part Details
| Part Number | 6036GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Lock Washer, .625 PLTD |
Compatibility & Fitment
| Name | Model |
|---|---|
| Genie Powered Superlift | Genie Powered Superlift |
| Genie Superlift | Genie Superlift |
| IWP | IWP |
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-100HD | S-100HD |
| S-120HD | S-120HD |
| SX-150 | SX-150 |
| SX-180 | SX-180 |
| SX-135 XC | SX-135 XC |
| S-40 | S-40 |
| S-45 | S-45 |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-85 XC | S-85 XC |
| S-65 XC | S-65 XC |
| S-85 XC FE | S-85 XC FE |
| S-85 XC E | S-85 XC E |
| S-3800 | S-3800 |
| S-3200 | S-3200 |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GS-1530 | GS-1530 |
| GS-1930 | GS-1930 |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| Z-60/34 | Z-60/34 |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-135/70 | Z-135/70 |
| Z-51/30J | Z-51/30J |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J IC | Z-45/25J IC |
| ZX-135/70 | ZX-135/70 |
| Z-45/22 | Z-45/22 |
| Z-34 IC | Z-34 IC |
| Z-80/60 | Z-80/60 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
