The Genie 01.4032.0002GT is a genuine OEM Spring Washer D6 ZN designed for Genie GTH series telehandlers. Sourced directly from Genie, this washer is built to the same specification as the original hardware installed at the factory, ensuring a correct, consistent fit across the GTH model range. This component is compatible with a wide range of GTH telehandlers including the GTH-5519, GTH-4014, GTH-4018, GTH-3007, GTH-2506, GTH-1256, GTH-1544, GTH-3512SX, GTH-4010SX, and additional GTH variants — cross-reference part number 01.4032.0002GT against your parts manual to confirm fitment for your specific unit. As a genuine OEM part, this spring washer integrates directly into the existing fastener assembly without any adaptation, maintaining the mechanical integrity your machine depends on.
Key Features
- Genuine OEM Hardware Grade — Zinc-plated D6 spring washer manufactured to Genie's original material and dimensional specification, delivering consistent clamping force retention under load and vibration.
- Direct Hardware Replacement — Matches the original washer profile and seat geometry, so it drops into existing bolt assemblies without filing, shimming, or reworking the joint.
- Broad GTH Telehandler Coverage — Fits a wide range of Genie GTH telescopic handlers, including IIIA, IIIB, AU, ACF, SX, and R-suffix variants across multiple lift-capacity configurations.
- Maintains Joint Preload Under Operating Stress — Spring washers are critical for preventing fastener loosening caused by machine vibration and dynamic loading — replacing a worn or flattened washer restores the clamping reliability the joint was designed to deliver.
- Zinc Plating for Corrosion Resistance — The ZN (zinc) coating provides a layer of protection against rust and surface oxidation, extending service life in outdoor and all-weather telehandler applications.
A spring washer is a hardened, split or wave-form ring placed beneath a fastener to maintain tension in a bolted joint. As a machine operates, vibration and repeated load cycling can work a standard flat washer loose over time — the spring washer resists this by exerting a continuous elastic force against the fastener, keeping the connection tight. When a spring washer is flattened, cracked, or missing, that clamping force is lost, and fasteners can back out gradually, leading to loose assemblies, abnormal wear on adjacent components, and potential structural issues at critical joints. Replacing a failed spring washer promptly with the correct OEM part restores the joint to its intended holding strength.
Part Details
| Part Number | 01.4032.0002GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Spring Washer D6 ZN |
Compatibility & Fitment
| Name | Model |
|---|---|
| GTH-5519 | GTH-5519 |
| GTH-4014 IIIA | GTH-4014 IIIA |
| GTH-4014 IIIB | GTH-4014 IIIB |
| GTH-4018 IIIA | GTH-4018 IIIA |
| GTH-4018 IIIB | GTH-4018 IIIB |
| GTH-4016R IIIB | GTH-4016R IIIB |
| GTH-4018R IIIB | GTH-4018R IIIB |
| GTH-4014 AU | GTH-4014 AU |
| GTH-4018 AU | GTH-4018 AU |
| GTH-3007 IIIA | GTH-3007 IIIA |
| GTH-3007 IIIB | GTH-3007 IIIB |
| GTH-1256 AF | GTH-1256 AF |
| GTH-5021 R | GTH-5021 R |
| GTH-5021 R IIIA | GTH-5021 R IIIA |
| GTH-2506 | GTH-2506 |
| GTH-4016R IIIA | GTH-4016R IIIA |
| GTH-4018R IIIA | GTH-4018R IIIA |
| GTH-1256 | GTH-1256 |
| GTH-1544 | GTH-1544 |
| GTH-2506 AU.3 | GTH-2506 AU.3 |
| GTH-3007 | GTH-3007 |
| GTH-3007 AU.3 | GTH-3007 AU.3 |
| 3P/700-REM 4400 | 3P/700-REM 4400 |
| GTH-5519 S | GTH-5519 S |
| GTH-2506 AU.2 | GTH-2506 AU.2 |
| GTH-3007 AU.2 | GTH-3007 AU.2 |
| GTH-3007 AU-AG | GTH-3007 AU-AG |
| GTH-3512SX | GTH-3512SX |
| GTH-4010SX | GTH-4010SX |
| GTH-3007 FMS | GTH-3007 FMS |
| GTH-2506 IIIA | GTH-2506 IIIA |
| GTH-2506 IIIB | GTH-2506 IIIB |
| GTH-2506 AU | GTH-2506 AU |
| GTH-3007 ACF | GTH-3007 ACF |
| GTH-3512 ACF | GTH-3512 ACF |
| GTH-3713 SX | GTH-3713 SX |
| GTH-3713 AU | GTH-3713 AU |
| Z33/18 | Z33/18 |
| Z-33 DC Power | Z-33 DC Power |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
