The Genie 6564GT is a genuine OEM Shim Washer,.765 X 1.312 X.093, designed for a wide range of Genie and Terex equipment including GS scissor lifts, GR Runabout vertical mast lifts, AWP and IWP push-around personnel lifts, TML light towers, and Superlift and Load Lifter material lift lines. As a factory-sourced component, this shim washer matches the exact thickness and diameter tolerances specified for the original assembly, ensuring correct spacing and load distribution at every fastened joint. Cross-reference part number 6564GT against your Genie parts manual to confirm application before ordering. With coverage spanning dozens of models across multiple product families, this single part supports a broad fleet with one stocked SKU.
Key Features
- Exact OEM Thickness Tolerance — Sourced directly from Genie, this shim washer meets the precise .093-inch thickness specification required to maintain correct stack height and bearing preload in the original assembly.
- Correct Diameter for Drop-In Installation — The .765-inch inner and 1.312-inch outer diameter match the fastener and bore dimensions of the original mounting point, so the washer seats flush without rework or shimming.
- Broad Multi-Family Fitment — One part covers GS scissor lifts, GR Runabout mast lifts, AWP and IWP personnel lifts, TML light towers, and Superlift and Load Lifter material lifts — reducing the number of unique SKUs needed across a mixed fleet.
- Maintains Proper Component Alignment — A correctly fitted shim washer keeps mating surfaces parallel and prevents axial play that can accelerate wear on pins, bushings, and adjacent hardware.
- Genuine OEM Assurance — As a genuine Genie part, this washer is manufactured to the same material grade and dimensional standard as the component installed at the factory, supporting the integrity of the assembly over the long service life of the machine.
A shim washer is a precision spacer placed between mating components to set a controlled gap, control preload, or bring two surfaces into exact alignment. In aerial and material lift assemblies, shim washers are commonly found at pivot points, pin joints, and structural connections where even a small amount of axial play can cause uneven loading, accelerated bushing wear, or unwanted movement in the structure. When a shim washer wears thin, deforms, or goes missing entirely, the surrounding hardware begins to carry forces it was not designed to absorb — leading to premature wear on pins, bores, and fasteners and, in some cases, perceptible looseness or noise in the affected assembly. Replacing a worn or damaged shim washer with the correct OEM part restores the designed clearance and keeps the joint performing as the manufacturer intended.
Part Details
| Part Number | 6564GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Shim Washer, .765 X 1.312 X .093 |
Compatibility & Fitment
| Name | Model |
|---|---|
| TML-4000 | TML-4000 |
| TML-4000N | TML-4000N |
| AWP Super Series | AWP Super Series |
| Superlift Advantage | Superlift Advantage |
| Superlift Contractor | Superlift Contractor |
| Super Tower | Super Tower |
| Load Lifter | Load Lifter |
| Genie Powered Superlift | Genie Powered Superlift |
| Genie Load Lifter | Genie Load Lifter |
| AWP Super | AWP Super |
| GR-8 | GR-8 |
| GR-12 | GR-12 |
| GR-15 | GR-15 |
| Powered Superlift Advantage | Powered Superlift Advantage |
| DPL | DPL |
| PLC PLI | PLC PLI |
| AWP | AWP |
| IWP | IWP |
| GS-1530 | GS-1530 |
| GS-1532 | GS-1532 |
| GS-1930 | GS-1930 |
| GS-1932 | GS-1932 |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-4047 | GS-4047 |
| GS-2646 AV | GS-2646 AV |
| GS-2646 AV35 | GS-2646 AV35 |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GS-30 | GS-30 |
| GS-32 | GS-32 |
| GS-46 | GS-46 |
| TZ-50 | TZ-50 |
| TMZ-50/30 | TMZ-50/30 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
