The Genie 94652GT is a genuine OEM Hi-Temp Slit Wire Loom designed for a wide range of Genie telescopic boom lifts, articulating boom lifts, and scissor lifts. As a factory-sourced component, this part meets the exact material and dimensional specifications Genie engineers built into the original machine. It fits an extensive lineup including S and SX telescopic booms, Z and ZX articulating booms, and GS scissor lifts — cross-reference part number 94652GT against your machine's parts manual to confirm fitment before ordering. When a wire loom degrades or fails, exposed wiring becomes vulnerable to heat, abrasion, and mechanical damage, making prompt replacement essential to keeping electrical systems protected and the machine operating safely.
Key Features
- High-Temperature Material Grade — Constructed from slit hi-temp loom material rated to withstand the elevated thermal conditions found near drive motors, engine compartments, and hydraulic components on aerial lift platforms.
- Slit Design for Easy Harness Routing — The pre-slit channel allows technicians to feed existing wire harnesses into the loom without disconnecting connectors, speeding up installation in the field.
- Genuine OEM Specification — Sourced directly from Genie, this loom matches the original 1/2-inch diameter profile and material grade specified at the time of manufacture, ensuring consistent coverage and secure fit within existing routing clips and tie points.
- Broad Cross-Platform Fitment — Compatible with Genie S and SX telescopic booms, Z and ZX articulating booms, and GS large-platform scissor lifts, making it a practical stocking part for fleets running mixed Genie equipment.
- Wiring Harness Protection Where It Counts — A correctly installed wire loom shields harness conductors from chafing, vibration fatigue, and heat damage — preventing intermittent faults and electrical failures that can ground a machine mid-shift.
- Electrical System Integrity on Aerial Equipment — On boom lifts and scissor lifts, degraded wiring protection can compromise control circuits critical to safe platform operation. Replacing a worn loom restores the insulation barrier the original design relies on.
A wire loom is a protective sleeve routed around wiring harnesses to guard conductors against heat, abrasion, pinching, and environmental exposure. On aerial work platforms, harnesses run through boom sections, chassis channels, and engine bays where they face constant movement and thermal stress. The slit design of this loom allows it to wrap around an existing harness in place, and the hi-temp rating ensures the material does not soften or crack in proximity to engines or hydraulic systems. When loom material deteriorates, insulation on the conductors beneath can wear through, leading to shorts, control faults, or failed safety circuits — conditions that take a machine out of service and require significantly more labor to diagnose and repair than a straightforward loom replacement.
Part Details
| Part Number | 94652GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Wire Loom, 1/2 Dia. Slit Hi-Temp |
Compatibility & Fitment
| Name | Model |
|---|---|
| SX-150 | SX-150 |
| S-60 XC | S-60 XC |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-180 | SX-180 |
| SX-135 XC | SX-135 XC |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-60 FE Hybrid | S-60 FE Hybrid |
| S-60 DC | S-60 DC |
| S-60 FE | S-60 FE |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-45/25 | Z-45/25 |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| ZX-135/70 | ZX-135/70 |
| Z-62/40 | Z-62/40 |
| Z-80/60 | Z-80/60 |
| Z-34/22 IC | Z-34/22 IC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 N | Z-34/22 N |
| Z-45 XC | Z-45 XC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-60 FE | Z-60 FE |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
