The Genie 75640GT is a genuine OEM Wire Loom, 3/4 Dia designed for a wide range of Genie telescopic and articulating boom lifts, scissor lifts, and telehandlers. As a factory-sourced component, this wire loom is built to the same specification as the part it replaces, ensuring correct fit and proper wire protection across every compatible machine. Cross-reference part number 75640GT against your Genie parts manual to confirm compatibility with your specific model and serial number. This loom fits an extensive lineup including S and SX series telescopic booms, Z and ZX series articulating booms, GS series scissor lifts, and GTH series telehandlers.
Key Features
- Genuine OEM Construction — Sourced directly from Genie, this wire loom matches the original diameter specification of 3/4 in., providing the same protective channel and routing path as the factory-installed part.
- Direct Drop-In Replacement — Engineered to install in the existing wire routing channels without alteration, maintaining original wire management geometry throughout the machine.
- Broad Fleet Compatibility — Fits Genie S and SX series telescopic booms, Z and ZX series articulating booms, GS series scissor lifts, and GTH series telehandlers, covering a substantial portion of the Genie product lineup.
- Harness Protection Where It Counts — Properly routes and shields wiring harnesses from abrasion, pinching, and environmental exposure — protecting the electrical circuits that power critical lift and drive functions.
- Electrical System Integrity — A damaged or missing wire loom can expose harnesses to chafing and wear, leading to shorts, intermittent faults, or control failures on aerial equipment where electrical reliability is essential to safe operation.
A wire loom is a flexible protective sleeve that bundles and routes electrical wiring harnesses through a machine's structure. Its job is to keep cables organized, prevent them from contacting sharp edges or moving components, and shield them from heat, moisture, and mechanical abrasion. When a wire loom cracks, splits, or goes missing, the harnesses it protects become vulnerable to wear that can cause shorts, intermittent electrical faults, or complete circuit failures — any of which can interrupt lift operation and trigger fault codes on modern Genie machines. Keeping this component in good condition is a straightforward way to protect the electrical systems that everything else on the machine depends on.
Part Details
| Part Number | 75640GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Wire Loom, 3/4 Dia |
Compatibility & Fitment
| Name | Model |
|---|---|
| SX-150 | SX-150 |
| S-60 XC | S-60 XC |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-180 | SX-180 |
| SX-135 XC | SX-135 XC |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-60 J | S-60 J |
| S-60 FE Hybrid | S-60 FE Hybrid |
| S-60 DC | S-60 DC |
| S-60 FE | S-60 FE |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| GS-1932 | GS-1932 |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-4046 | GS-4046 |
| GTH-1056 | GTH-1056 |
| GTH-1256 | GTH-1256 |
| GTH-1044 | GTH-1044 |
| GTH-1244 | GTH-1244 |
| GTH-1544 | GTH-1544 |
| Z-60/34 | Z-60/34 |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-45/25 | Z-45/25 |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| ZX-135/70 | ZX-135/70 |
| Z-62/40 | Z-62/40 |
| Z-80/60 | Z-80/60 |
| Z-34/22 IC | Z-34/22 IC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 N | Z-34/22 N |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
