The Wacker Neuson 5100065070 is a genuine OEM Grooved Ball Bearing designed for the BS-series gasoline vibratory rammer family. Sourced directly from Wacker Neuson, this bearing meets the original engineering tolerances specified for the BS30, BS50-2, BS50-2plus, BS60-2, BS60-2plus, BS62-2, BS68-2, and BS70-2 rammer models. As a genuine OEM component, the 5100065070 is manufactured to the same standards as the bearing installed at the factory, ensuring a direct, drop-in replacement with no guesswork on fitment. Whether you are servicing a BS62-2, a BS68-2b/28, or any of the wide range of BS50-2 and BS60-2 variants, this bearing is the correct specification part for the job.
Key Features
- OEM-Grade Radial Load Tolerance — Manufactured to the original bearing specification, delivering the radial and axial load capacity the BS-series rammer drivetrain demands under continuous impact cycling.
- Direct Drop-In Installation — Matches the original bore dimensions and outer race geometry, seating correctly into the bearing housing without machining or shimming.
- Broad BS-Series Fitment — Confirmed fit across BS30, BS50-2, BS50-2plus, BS60-2, BS60-2plus, BS62-2, BS68-2, and BS70-2 rammer variants, including US, CN, Sunbelt, and standard configurations.
- Sustained Impact Resistance — A correctly seated grooved ball bearing keeps the crankshaft and drive components aligned through high-frequency ramming cycles; a worn bearing causes vibration, accelerated wear, and eventual drivetrain failure.
- Genuine Wacker Neuson OEM Part — Supplied under the original Wacker Neuson part number 5100065070, eliminating any uncertainty about specification compatibility during a service or rebuild.
A grooved ball bearing — also known as a deep-groove ball bearing — supports the rotating shaft inside the rammer's crankcase, carrying the radial loads generated by the eccentric drive mechanism that produces the machine's compaction stroke. By maintaining precise shaft alignment under the repetitive, high-impact loading of vibratory rammer operation, the bearing allows the drivetrain to convert engine power efficiently into compaction force. When this bearing wears or loses its race integrity, the result is increased vibration, audible rumbling from the crankcase, and progressive damage to surrounding drivetrain components — making timely replacement critical to keeping the rammer operating correctly.
Part Details
| Part Number | 5100065070 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Grooved Ball Bearing |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS30 | BS30 | 5000005216, 5100037146 |
| BS50-2 10in | BS50-2 10in | 5100058346 |
| BS50-2 11in US | BS50-2 11in US | 5100030590 |
| BS50-2 11in | BS50-2 11in | 5100030591 |
| BS50-2 11in o. bsz | BS50-2 11in o. bsz | 5100068309 |
| BS50-2 6in | BS50-2 6in | 5100030592 |
| BS50-2plus 11in US | BS50-2plus 11in US | 5100030594 |
| BS50-2plus 11in ha US | BS50-2plus 11in ha US | 5100030595 |
| BS50-2plus 11in | BS50-2plus 11in | 5100030596 |
| BS50-2plus 6in (24mm) | BS50-2plus 6in (24mm) | 5100030597 |
| BS60-2 11in | BS60-2 11in | 5100030600, 5100037561, 5100051580 |
| BS60-2plus 11in US | BS60-2plus 11in US | 5100030602 |
| BS60-2plus 11in ha US | BS60-2plus 11in ha US | 5100030603 |
| BS60-2plus 11in | BS60-2plus 11in | 5100030604 |
| BS60-2plus 11in CN | BS60-2plus 11in CN | 5100039660 |
| BS62-2/25 | BS62-2/25 | 5100070151 |
| BS62-2/28 | BS62-2/28 | 5100070149 |
| BS62-2b/28 | BS62-2b/28 | 5100061964 |
| BS62-2lb/16 | BS62-2lb/16 | 5100061965 |
| BS62-2lb/16 Sunbelt | BS62-2lb/16 Sunbelt | 5100070528 |
| BS68-2/28 | BS68-2/28 | 5100070150 |
| BS68-2b/28 | BS68-2b/28 | 5100061969 |
| BS68-2b/28 Sunbelt | BS68-2b/28 Sunbelt | 5100070529 |
| BS70-2 11in | BS70-2 11in | 5100030607 |
| BS70-2plus 11in US | BS70-2plus 11in US | 5100030608 |
| BS70-2plus 11in | BS70-2plus 11in | 5100030609 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
