The Wacker Neuson Engine Gasket Set is a genuine OEM component designed for the BS50-2, BS50-2i, BS60-2, BS60-2i, BS70-2, BS70-2i, and BS65-V series vibratory rammers. As a direct Wacker Neuson OEM part, is manufactured to the exact material and dimensional specifications required for proper engine sealing across this rammer family. This set covers the full range of BS-series two-cycle and oil-injected engine variants, including EU-market and high-altitude configurations. If your rammer is due for an engine rebuild or top-end service, this is the correct gasket set to have on hand.
Key Features
- OEM Material and Sealing Spec: — Each gasket in this set is produced to Wacker Neuson's exact compression and temperature tolerances for two-cycle and oil-injected small engines, ensuring proper combustion chamber sealing without over- or under-compression.
- Complete Set for Engine Service: — Includes all gaskets needed for an engine rebuild or top-end service on BS-series rammers, so you won't be left short mid-repair with missing sealing components.
- Broad BS-Series Compatibility: — Verified to fit BS50-2, BS50-2i, BS60-2, BS60-2i, BS70-2, BS70-2i, and BS65-V vibratory rammers across standard, EU, oil-injected, high-altitude, and variable-speed variants.
- Restored Compression and Engine Efficiency: — Worn or blown gaskets allow combustion gases to escape, robbing the rammer of impact energy and causing hard starts. A fresh gasket set restores full compression and consistent blow-per-minute output.
- Genuine OEM Traceability: — Sourced directly through the Wacker Neuson parts network under part number 5000178827, giving you full confidence in cross-reference accuracy before you pull the engine apart.
The engine gasket set forms the critical sealing layer between the cylinder, cylinder head, and crankcase on a two-cycle vibratory rammer engine. These gaskets maintain compression within the combustion chamber and prevent exhaust gases or fuel-air mixture from escaping past mating surfaces during operation. When gaskets degrade, crack, or blow out — typically from heat cycling, over-revving, or deferred maintenance — the engine loses compression, becomes difficult to start, runs rough, and delivers noticeably weaker impact force at the shoe. Replacing the full gasket set during any engine teardown is standard practice, and using the correct OEM set ensures every sealing surface is addressed with a part built for that specific engine design.
Part Details
| Part Number | 5000178827 |
|---|---|
| Old Part Number | 0178827 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Engine Gasket Set |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS50-2i | BS50-2i | 5000009338, 5000009383, 5000009473, 5000620026, 5200003696 |
| 250mm/10in Shoe, Vibratory Ram mer | BS50-2 | 5000009384, 5000620733, 5000620025, 5000620048, 5000620609, 5000620610, 5000009380, 5000009382 |
| BS60-2i | BS60-2i | 5000009339, 5000009393, 5000620613, 5000620614 |
| Oil-injected Rammer with 250mm /10in Shoe | BS50-2i EU | 5000009412, 5000009414, 5000009416 |
| 330mm/13in Shoe, Oil-injected Rammer | BS70-2i | 5000009341, 5000009401 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-2 EU | 5000009410, 5000009411, 5000009413 |
| Oil-injected Rammer with 280mm /11in Shoe | BS60-2i EU | 5000009419, 5000009420 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 | 5000620905, 5000620612, 5000009388, 5000009391 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 EU | 5000009417, 5000009421, 5000009418 |
| Oil-injected Rammer with 330mm /13in Shoe | BS70-2i EU | 5000009426, 5000009428 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 | 5000620907, 5000009397, 5000009399 |
| Variable Speed Rammer with 280 mm/11in Shoe | BS65-V EU | 5000009423 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 EU | 5000009424, 5000009425, 5000009427 |
| 280mm/11in Shoe, Variable Spee d Rammer | BS65-V | 5000009396 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
Wacker Neuson