The Bomag 07320414 Countersunk Screw is a genuine OEM fastener designed for Bomag BF-series pavers, BW 174 tandem rollers, and BM-series cold milling machines. Sourced directly from Bomag, this countersunk screw delivers an exact, flush-seating fit that meets the original assembly specification. Compatible across a wide range of Bomag equipment including BF 600, BF 700, BF 800, and BF 900 pavers, BW 174 AP-5 and BW 174 ACP-5 AM tandem rollers, and BM 2000/65 Stage V and BM 2200/65 Stage V cold milling machines, this part is the correct choice for scheduled maintenance and field repairs alike. Using the correct OEM fastener — part number 07320414 — ensures the joint holds to its designed torque and clamping load without risk of misfit or premature failure.
Key Features
- Genuine OEM Fastener Grade — manufactured to Bomag's original material and thread specification, so clamping load and shear strength match what the assembly was engineered to handle
- Flush Countersunk Profile — the angled head seats fully into its mating surface, eliminating proud hardware that can snag, vibrate loose, or interfere with adjacent components
- Broad Equipment Coverage — fits BF 600, BF 700, BF 800, and BF 900 paver variants, BW 174 AP-5 and BW 174 ACP-5 AM tandem rollers, and BM 2000/65 Stage V and BM 2200/65 Stage V cold milling machines
- Direct Drop-In Replacement — threads, head geometry, and drive type match the original fastener, allowing straightforward installation without rework or additional hardware
- Protects Structural Integrity — a correctly torqued, properly seated countersunk screw maintains the clamping force that holds panels, covers, and structural brackets in position under continuous vibration and load
A countersunk screw is a fastener with a tapered conical head designed to sit flush with — or slightly below — the surface of the material it secures. On paving and compaction equipment, these screws are used in locations where a protruding fastener head would interfere with clearances, airflow, or the movement of adjacent assemblies. When a countersunk screw becomes stripped, corroded, or broken, the joint it holds can work loose under machine vibration, leading to panel movement, misalignment, or accelerated wear on surrounding components. Replacing a damaged fastener promptly with the correct OEM part — part number 07320414 — restores full clamping integrity and keeps the assembly performing as designed.
Part Details
| Part Number | 07320414 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Countersunk Screw |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Paver | BF 600 P HCE | 00800631 |
| Paver | BF 600 C HCE | 00800633 |
| Paver | BF 600 C HCG | 00800635 |
| Paver | BF 600 C HSG | 00800637 |
| Paver | BF 600 C HSE | 00800639 |
| Paver | BF 600 P HCG | 00800641 |
| Paver | BF 600 P HSE | 00800645 |
| Paver | BF 600 C-E | 00800651 |
| Paver | BF 600 P-E | 00800653 |
| Paver | BF 600 C-G | 00800655 |
| Paver | BF 600P HSE | 00800719, 00800727, 00824239 |
| Paver | BF 600C HCE | 00800725, 00800733 |
| Paver | BF 600C HSE | 00800731 |
| Paver | BF 800 C S600 | 00800851, 00800873 |
| Paver | BF 600 P-2 S 500 | 00800865, 00825913 |
| Paver | BF 700 C-2 S 600 | 00800867 |
| Paver | BF 700 C-2 S 500 | 00800869, 00800899 |
| Paver | BF 800 C S500 | 00800871 |
| Paver | BF 800 P S500 | 00800879 |
| Paver | BF 600 C-2 S 500 | 00800907 |
| Paver | BF 800 C S600-T3 | 00800939 |
| Paver | BF 900 C S600-T3 | 00800943 |
| Paver | BF 600 P-2 S 600 | 00800949, 00825915 |
| Paver | BF200C 2 | 00825873 |
| Paver | BF 600 C-2 S 600 | 00825903 |
| Tandem Roller | BW 174 AP-5 | 00826323 |
| Tandem Roller | BW 174 ACP-5 AM | 00826325 |
| Paver | BF 600 P-3 S 500 | 00826343, 00826971 |
| Paver | BF 700 C-3 S 500 | 00826351 |
| Paver | BF 800 C-3 S 600 | 00826407 |
| Cold Milling Machine | BM2000/65 Stage V | 00826467 |
| Cold Milling Machine | BM2200/65 Stage V | 00826469 |
| Paver | BF 700 C-3 S 600 | 00827127 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
