The Honda 95005-35008-10M Bulk Vacuum Hose (3.5X8000) is a genuine OEM vacuum hose designed for a wide range of Honda generators, welder generators, horizontal shaft engines, and lawn tractors. As a direct Honda OEM component, this hose is cut and sized to Honda's own specifications, making it the right choice when restoring or servicing vacuum-dependent circuits on equipment including GX120, GX160, GX240, GX270, GX340, and GX390 horizontal shaft engines, EB and EM generator models, EW140 and EW171 welder generators, and H4013, H4514, and H4518 lawn tractors. This part is sold as bulk hose stock — verify your required cut length against your machine's service manual before ordering. Always confirm the part number 95005-35008-10M against your model's parts diagram to ensure this hose matches your application.
Key Features
- Genuine Honda OEM — sourced directly from Honda, this vacuum hose meets the exact dimensional and material requirements Honda engineers specified for the vacuum circuits it serves.
- Broad Fitment Range — listed for GX-series horizontal shaft engines including GX120, GX160, GX240, GX270, GX340, and GX390; EB3500, EB3800, EB5000, and EB6500 generators; EM3500, EM3800, EM5000, EM650, and EM6500 generators; EW140 and EW171 welder generators; and H4013, H4514, and H4518 lawn tractors.
- Bulk Hose Format — supplied as a full-length bulk roll, allowing technicians to cut the correct length for each application rather than being limited to a fixed pre-cut piece.
- Serial Number Verification Recommended — Honda updates and supersedes parts at serial number breaks, so check your machine's serial number against the fitment table to confirm part number 95005-35008-10M is the correct hose for your specific unit.
- Vacuum Circuit Integrity — a cracked, hardened, or collapsed vacuum hose disrupts the low-pressure signal that controls fuel system and emissions functions; replacing it with the OEM-spec hose restores consistent vacuum routing across the circuit.
A vacuum hose carries low-pressure air signals between components in an engine or equipment system — commonly linking carburetors, fuel valves, and emissions-related ports. When this hose cracks, hardens, collapses, or pulls loose from a fitting, the vacuum signal is lost or reduced, which can cause hard starting, erratic idle, or fuel delivery problems. Because this part is supplied as bulk hose stock identified by its 3.5 mm inner diameter and 8,000 mm length, a technician cuts the exact length needed for each repair, making it a practical shop supply for servicing multiple machines across Honda's generator, engine, and lawn tractor lines.
Part Details
| Part Number | 95005-35008-10M |
|---|---|
| Brand | Honda |
| Part Type | Genuine OEM |
| Description | Bulk Vacuum Hose (3.5X8000) |
Compatibility & Fitment
| Name | Models | Serial Range |
|---|---|---|
| Generator | EB3500, EB3800, EB5000, EB6500, EM650, EM3500, EM3800, EM5000, EM6500 | All |
| Horizontal Shaft Engine | GX120, GX160, GX240, GX270, GX340, GX390 | All |
| Lawn Tractor | H4013, H4514, H4518 | All |
| Welder Generator | EW140, EW171 | All |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
