The Wacker Neuson Jet is a genuine OEM carburetor jet designed for a wide range of Wacker Neuson equipment, including PT2 trash pumps, PG3 dewatering pumps, GP2600 portable generators, CT36-6 concrete trowels, BFS floor saws, VP and WP single-direction vibratory plates, and BPU reversible vibratory plates. As a direct OEM replacement, the meets the original engineering specifications set by Wacker Neuson, ensuring the carburetor delivers the correct air-fuel mixture for each supported engine. This jet is engineered to drop into the existing carburetor without modification, making it a straightforward service item for technicians and equipment operators. With cross-family compatibility spanning compaction, pumping, power generation, concrete finishing, and cutting equipment, keeping part number in your service inventory is a smart call for any dealer or contractor running a mixed Wacker Neuson fleet.
Key Features
- OEM-Calibrated Fuel Metering — Manufactured to Wacker Neuson's original orifice specification, ensuring the correct fuel delivery rate for consistent engine performance across all supported applications.
- Direct Carburetor Drop-In — Machined to match the original jet seat dimensions, so installation requires only standard hand tools and no re-jetting or carburetor modification.
- Broad Cross-Family Fitment — Confirmed for PT2 and PG3 pumps, GP2600 generators, CT36-6 trowels, BFS floor saws, VP/WP single-direction vibratory plates, and BPU2540 reversible plates — one part number, many machines.
- Restored Throttle Response — A clogged or worn jet causes rough idle, lean-running, and poor throttle response; replacing it with a correctly sized OEM jet restores crisp acceleration and smooth operation under load.
- Fuel System Integrity — Using the correct OEM jet prevents over-fueling or lean conditions that can damage engine internals, making this a critical precision component rather than a generic consumable.
A carburetor jet is a precisely sized metering orifice that controls how much fuel is drawn into the engine's air stream at a given throttle position. The diameter of the jet is calibrated specifically for the engine's displacement and fuel demand — even a small deviation in orifice size will cause the engine to run too rich or too lean, leading to hard starting, power loss, excessive fuel consumption, or internal engine damage over time. When a jet becomes clogged with varnish deposits from stale fuel or worn from extended use, the engine loses the ability to maintain a stable air-fuel ratio, and performance deteriorates quickly. Replacing the jet with a genuine OEM part like the Wacker Neuson 5000156547 restores precise fuel metering and brings the engine back to its original operating condition.
Part Details
| Part Number | 5000156547 |
|---|---|
| Old Part Number | 0156547 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Jet |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT2 Pump | PT2 | 5000009318, 5000009319, 5000009320 |
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| Premium Portable Generator | GP2600 | 5000620088, 5000620116 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| Single Direction Plate | VPR70 | 5000006909 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000630018, 5000009547, 5000630066 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630020, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| WP 2050W | WP2050W | 5000630023 |
| WPP 1540W | WPP1540W | 5000630027 |
| WPP 1550W | WPP1550W | 5000630031 |
| WPP 1550Ww | WPP1550Ww | 5000630032 |
| WPP 1540Ww | WPP1540Ww | 5000630028 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Single Direction Plate | WP1550Ww | 5000630113 |
| Single Direction Plate | WP2050Ww | 5000630116 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| Floor Saw | BFS 12 | 5000630092 |
| Single Direction Plate | WP1540Ww | 5000630111 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saws | BFS 614B | 5000009526 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
