The Wacker Neuson Jet is a genuine OEM carburetor jet designed for a wide range of Wacker Neuson equipment, including PT2 trash pumps, VP and WP series single-direction vibratory plates, CT36-6 concrete trowels, GP2600 portable generators, PG3 dewatering pumps, BFS floor saws, BPU2540 reversible vibratory plates, and RS600 walk-behind rollers. As a factory-sourced component, the meets the exact OEM specifications required for proper fuel metering and engine performance across every compatible application. This jet is a direct-fit replacement that drops into the existing carburetor without alteration, making it a straightforward service part for technicians and operators alike. Confirm your model number against the fitment list before ordering to ensure accurate application.
Key Features
- Genuine OEM Fuel Metering Precision — Factory-calibrated orifice sizing ensures the correct air-fuel ratio for consistent engine output across all listed applications.
- Direct Carburetor Drop-In — Engineered to the same thread spec and orifice dimensions as the original, seating cleanly into the carburetor body without rework.
- Broad Cross-Equipment Fitment — A single OEM part number covering PT2 and PG3 pumps, VP/WP vibratory plates, CT36-6 trowels, GP2600 generators, BFS floor saws, BPU2540 reversible plates, and RS600 rollers.
- Restored Throttle Response and Idle Stability — A worn or clogged jet causes rough idling, hesitation, and hard starting; replacing it with the correct OEM jet restores clean, predictable engine response.
- Fuel System Integrity — Correct jet sizing prevents over-rich or over-lean conditions that can cause engine damage, excessive emissions, or fuel waste over extended operation.
A carburetor jet is a precisely sized metering orifice that controls the volume of fuel delivered into the engine's air stream at a given throttle position. The diameter of the jet's bore is calibrated to the engine's displacement and fuel demands — even a small deviation from spec will cause the engine to run too rich or too lean, leading to poor power output, increased fuel consumption, fouled spark plugs, or potential engine damage. When a jet becomes clogged with varnish deposits or wears out of spec, the symptoms appear quickly as rough idling, loss of power under load, or difficulty starting; replacing it with the correct OEM part restores the fuel delivery balance the engine was designed to operate on.
Part Details
| Part Number | 5000156547 |
|---|---|
| Old Part Number | 0156547 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Jet |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT2 Pump | PT2 | 5000009318, 5000009319, 5000009320 |
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| Premium Portable Generator | GP2600 | 5000620088, 5000620116 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| Single Direction Plate | VPR70 | 5000006909 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000630018, 5000009547, 5000630066 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630020, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| WP 2050W | WP2050W | 5000630023 |
| WPP 1540W | WPP1540W | 5000630027 |
| WPP 1550W | WPP1550W | 5000630031 |
| WPP 1550Ww | WPP1550Ww | 5000630032 |
| WPP 1540Ww | WPP1540Ww | 5000630028 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Single Direction Plate | WP1550Ww | 5000630113 |
| Single Direction Plate | WP2050Ww | 5000630116 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| Floor Saw | BFS 12 | 5000630092 |
| Single Direction Plate | WP1540Ww | 5000630111 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saws | BFS 614B | 5000009526 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
