The Wacker Neuson is a genuine OEM Idle Jet designed for a wide range of Wacker Neuson equipment, including PT2 trash pumps, CT36-6 concrete trowels, GP2600 portable generators, PDT2 and PDT3 diaphragm pumps, PG2 and PG3 dewatering pumps, and VP, WP, and BPU series vibratory plate compactors. As a direct factory replacement, this Idle Jet meets the same specifications as the original component installed at the time of manufacture. It also fits select BFS floor saws and GH3500 generators, making it one of the more versatile carburetor components in the Wacker Neuson parts catalog. Confirm your model and machine number against the fitment list before ordering to ensure compatibility.
Key Features
- Genuine OEM Fuel Metering Accuracy — Manufactured to the exact orifice sizing specified by Wacker Neuson, ensuring the correct air-fuel ratio at idle for smooth, stable low-speed engine operation.
- Direct Carburetor Drop-In — Installs directly into the carburetor body as a threaded jet, replacing the original component without modification to the fuel circuit or carburetor housing.
- Broad Cross-Equipment Fitment — Confirmed for PT2 trash pumps, CT36-6 trowels, GP2600 generators, PDT2/PDT3 diaphragm pumps, PG2/PG3 dewatering pumps, VP/WP vibratory plates, BPU2540 reversible plates, and BFS floor saws.
- Restores Stable Idle Performance — A clogged or worn idle jet causes rough idling, stalling, or failure to hold RPM at low throttle; replacing it restores consistent low-load engine behavior across the full equipment range.
- Fuel System Integrity — Using the correct OEM-spec jet prevents over-rich or over-lean idle conditions that can damage engine components or cause unsafe, unpredictable throttle response during operation.
The idle jet is a precisely sized brass orifice seated inside the carburetor that meters the flow of fuel during low-throttle and idle engine operation. At idle, the main jet is largely inactive, and the engine draws fuel almost entirely through this small jet — making its orifice diameter critical to achieving the correct mixture. When an idle jet becomes blocked by fuel varnish, debris, or corrosion, the engine will struggle to idle smoothly, stall under light load, or refuse to hold a set RPM. Replacing a worn or fouled idle jet with a genuine OEM part like the Wacker Neuson 5000156548 restores proper low-speed fuel delivery and keeps the engine running cleanly across its full operating range.
Part Details
| Part Number | 5000156548 |
|---|---|
| Old Part Number | 0156548 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Idle Jet |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT2 Pump | PT2 | 5000009318, 5000009319, 5000009320 |
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| Premium Portable Generator | GP2600 | 5000620088, 5000620116 |
| 50mm/2in Diaphragm Trash Pump | PDT2 | 5000009494, 5000620770 |
| 75mm/3in Diaphragm Trash Pumps | PDT3 | 5000009495, 5000620774 |
| PG2 Dewatering Pump | PG2 | 5000009496, 5000009497 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| Value Vibratory Plate, 11kN, 3 50mm/13.8in | VP1135R | 5000008709, 5000009071, 5000630061 |
| Value Vibratory Plate, 11 kN, 356mm/14in | VP1135RW | 5000009251, 5000009512 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| Vibratory Soil Plate, 60 kN | VP60X | 5000009533 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| Vibratory Soil Plate, 50 kN | VP50X | 5000009531 |
| Single Direction Plate | VPR70 | 5000006909 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000630018, 5000009547, 5000630066 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630020, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| VP50Xw-VIBROPLATE | VP50Xw | 5000630094 |
| VP60Xw-VIBROPLATE | VP60Xw | 5000630095 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| WP 2050W | WP2050W | 5000630023 |
| WPP 1540W | WPP1540W | 5000630027 |
| WPP 1550W | WPP1550W | 5000630031 |
| WPP 1550Ww | WPP1550Ww | 5000630032 |
| Single Direction Plate | AP1135R | 5000009518 |
| WPP 1540Ww | WPP1540Ww | 5000630028 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| Value Vibratory Plate, 11kN 356mm/14in | VP1135R-AU | 5000630102 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Single Direction Plate | WP1550Ww | 5000630113 |
| Single Direction Plate | WP2050Ww | 5000630116 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| Floor Saw | BFS 12 | 5000630092 |
| Single Direction Plate | WP1540Ww | 5000630111 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saws | BFS 614B | 5000009526 |
| 50mm/2in Diaphragm Trash Pump | PDI2 | 5000009489 |
| 75mm/3in Diaphragm Trash Pump | PDI3 | 5000009491, 5000009492 |
| Generator GH 3500 | GH3500 | 5000610079 |
| High Frequency Demolitionset | TEH 1 | 5000610241 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
