The Multiquip 0600200020 Bearing 6204-C3 is a genuine OEM bearing designed for the MT60H2 rammer. Sourced directly from Multiquip, this bearing meets the original design specification for the MT60H2 — a rammer that runs a Robin/Subaru engine and demands components built to handle continuous high-impact operation. The C3 internal clearance rating is not an arbitrary detail; it allows for the slight additional expansion that occurs under elevated operating temperatures, keeping the bearing running smoothly where a standard-clearance unit would bind. If you are replacing a worn or failed bearing on your MT60H2, the 0600200020 is the correct part.
Key Features
- C3 Clearance Rating for High-Heat Environments — The C3 designation provides greater internal radial clearance than a standard bearing, allowing for thermal expansion during sustained rammer operation without premature binding or failure.
- Genuine OEM Component — Supplied by Multiquip as an original equipment part, matching the exact specification installed at the factory on the MT60H2.
- Direct Fitment for MT60H2 Rammers — Engineered to drop into the correct bearing seat on the MT60H2 without modification, using the machine's existing hardware and housing dimensions.
- Protects Rotating Assembly Integrity — A correctly specified bearing keeps the rotating components of the rammer aligned and running true; a worn or incorrect bearing accelerates wear on shafts, housings, and adjacent components.
- Compact 6204 Series Geometry — The 6204 frame size is a proven, widely used deep-groove ball bearing profile that delivers strong radial load capacity in a compact envelope suited to the MT60H2's drivetrain.
A bearing in a rammer supports the rotating shaft that drives the machine's up-and-down compaction stroke. In a high-cycle machine like a rammer, bearings absorb both radial load and the repeated shock of each impact. The C3 internal clearance specification in the 0600200020 accounts for the heat generated during extended use, preventing the bearing from running tight and wearing prematurely. When a rammer bearing fails, the result is typically increased vibration, shaft wobble, or seizure — any of which will take the machine out of service until the bearing is replaced.
Part Details
| Part Number | 0600200020 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Bearing 6204-C3 |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rammers | MT60H2 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
