The Multiquip 16221ZA0800 is a genuine OEM Carburetor Gasket designed for a wide range of Multiquip and Whiteman equipment, including MC94P/S, MC64P/S, WM70S/P, MP2090HP, MP25E1, QP402H, QP3TH, R2000H, and GA3.6HA series machines. As an authentic OEM component, it is manufactured to the exact specifications required for proper carburetor sealing across all covered equipment families. Confirm your model code against the fitment list before ordering to ensure this is the correct gasket for your application. DHS Equipment supplies this part direct, so you can get your machine back in service without guesswork.
Key Features
- Authentic OEM Sealing Integrity — Manufactured to the precise material grade and compression profile required for a carburetor gasket, ensuring a fuel-tight seal that holds up under engine heat and vibration cycles.
- Drop-In Carburetor Fit — Dimensioned to seat correctly at the carburetor-to-engine interface with no trimming or shaping required, maintaining proper mating surface contact.
- Broad Multiquip Fitment — Compatible with MC94P/S, MC94SK/MC94PK, MC64P/S, WM70S/P, MP2090HP, MP2050E3, MP2050E1, MP2H, MP275E3, MP25E3, MP25E1, R2000H, QP402H, QP3TH, GA3.6HA, and GA3.6HZ models.
- Fuel System Performance — A correctly seated carburetor gasket maintains the air-fuel mixture balance the engine depends on; a worn or cracked gasket allows unmetered air into the fuel circuit, causing rough running, hard starts, and lean conditions.
- Fuel System Safety — A failed carburetor gasket can allow raw fuel or vapor to escape at the carburetor joint — replacing it with a genuine OEM gasket restores the sealed boundary that keeps fuel contained within the fuel system.
A carburetor gasket forms the sealing layer between the carburetor body and the engine intake, preventing air and fuel from leaking at that joint. Without a sound gasket, outside air enters the fuel circuit and upsets the air-fuel ratio the carburetor is calibrated to deliver, leading to lean-running conditions, loss of power, and difficulty starting. Over time, heat cycling and fuel exposure cause gasket material to harden, shrink, or crack, making periodic inspection and replacement a routine part of carburetor service.
Part Details
| Part Number | 16221ZA0800 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Carburetor Gasket |
Compatibility & Fitment
| Name | Model |
|---|---|
| MQ Mixers | MC94P/S |
| MQ Mixers | MC94SK/MC94PK |
| MQ Mixers | MC64P/S |
| Whiteman Mixers | WM70S/P |
| Saws | MP2090HP |
| Saws | MP2050E3 |
| Saws | MP2050E1 |
| Saws | MP2H |
| Saws | MP275E3 |
| Saws | MP25E3 |
| Saws | MP25E1 |
| Rollers | R2000H |
| Centrifugal Pumps | QP402H |
| Gasoline Powered Generators | GA3.6HA |
| Gasoline Powered Generators | GA3.6HZ |
| Trash Pumps | QP3TH |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
