The Multiquip 90055ZE1000 is a genuine OEM Tapping Screw 4 x 6 designed for a wide range of Multiquip, Whiteman, and Essick equipment including plate compactors, rammers, walk-behind trowels, rollers, mixers, saws, screeds, pumps, and vibrators. As a direct OEM fastener, 90055ZE1000 meets the original design specification for thread form, material grade, and drive type — ensuring a secure, rattle-free fit in every application it covers. This screw is stocked by DHS Equipment and ships as a genuine Multiquip replacement sourced directly through authorized channels. Confirm your model number against the fitment list below before ordering to ensure compatibility.
Key Features
- Genuine OEM Thread Specification — Manufactured to Multiquip's exact thread pitch and head geometry for a secure, torque-true installation across all listed applications.
- Self-Tapping Design — Cuts its own thread on installation, allowing fast, tool-efficient assembly without the need for a pre-tapped hole in compatible housings and panels.
- Broad Cross-Equipment Compatibility — A single OEM fastener shared across plate compactors (MVC, MVH, MVB series), rammers (MTX, MTR series), walk-behind trowels (CA4HM), rollers (V305EH, MRH800GS, R2000H), mixers, saws, pumps, screeds, and vibrators.
- Correct Material Grade — Hardness and surface finish are matched to the original spec, preventing stripped threads, corrosion-related seizing, or fastener shear under normal operating vibration.
- Direct OEM Replacement — Part number 90055ZE1000 cross-references directly to Multiquip's bill of materials, so there is no guesswork in fitment verification when ordering by model.
A tapping screw is a hardened fastener that forms or cuts mating threads as it is driven into a pre-drilled pilot hole in sheet metal, plastic housings, or light-gauge structural panels. On compact construction equipment, tapping screws are commonly used to secure access covers, guards, control panels, and ancillary brackets where a traditional bolt-and-nut assembly is not practical. When a tapping screw fails — through corrosion, over-torquing, or vibration-induced backing-out — the component it retains can shift, rattle, or expose internal parts to contamination and damage. Replacing a worn or missing fastener with the correct OEM specification screw restores the secure clamping load the original design depends on.
Part Details
| Part Number | 90055ZE1000 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Tapping Screw 4 x 6 |
Compatibility & Fitment
| Name | Model |
|---|---|
| MQ Mixers | MC94P/S |
| MQ Mixers | MC94SK/MC94PK |
| Whiteman Walk-Behind Power Trowels | CA4HM |
| Plate Compactors | MVH208GH |
| Rollers | MRH800GS |
| Plate Compactors | MVB85H |
| Plate Compactors | MVH128GH |
| Plate Compactors | MVC88VTHW |
| Plate Compactors | MVC88VTH |
| Rollers | V305EH |
| Saws | SP1G |
| MQ Mixers | MC12PH |
| Plate Compactors | MVC82VHW |
| Plate Compactors | MVC82VH |
| Rammers | MTX50HD |
| Plate Compactors | MVC40H |
| Plate Compactors | MVH158GH |
| Plate Compactors | MVH408GH |
| Plate Compactors | MVH308GH |
| Rammers | MTR40HF |
| Whiteman Mixers | WM120SH |
| Whiteman Mixers | WM120PH |
| Essick Mixers | EM120S Series |
| Essick Mixers | EM120P Series |
| Duo Screeds | DSGPULW |
| Saws | MP1455HP |
| Saws | MP120E |
| Saws | MP115E |
| Saws | MP1H |
| Rollers | R2000H |
| Centrifugal Pumps | QP402H |
| Plate Compactors | MVC90H |
| Plate Compactors | MVC64VHW |
| Plate Compactors | MVC64VH |
| Plate Compactors | MVH304GSB |
| MQ Mixers | MC64P/S |
| Whiteman Mixers | WM70S/P |
| Vibrators | G55H |
| Centrifugal Pumps | QP205SH |
| Centrifugal Pumps | QP3TH |
| Saws | MP2090HP |
| Saws | MP2050E3 |
| Saws | MP2050E1 |
| Saws | MP2H |
| Saws | MP275E3 |
| Saws | MP25E3 |
| Saws | MP25E1 |
| Saws | SP118 |
| Saws | SP1CE13H18 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
