The Multiquip 90104GF6000 is a genuine OEM Flange Bolt 6x20 designed for a wide range of Multiquip and Stow equipment including the GA-9.7 portable generator, SP2 and SP213H20 flat saw series, CS8CE13H20 and CS820H20 pavement saws, and SGW-250SS welder. As a factory-sourced fastener, the part is manufactured to the exact thread pitch, shank diameter, and flange geometry specified for each application, ensuring proper clamp load and seating without modification. This bolt ships as a direct replacement, making it a straightforward service part for routine maintenance or repair across multiple machine platforms.
Key Features
- Genuine OEM Fastener Grade — Manufactured to Multiquip's specified tensile and torque ratings for the 6x20 flange bolt application, so clamp load is consistent and predictable at installation.
- Integrated Flange Design — The built-in flange distributes clamping force evenly across the mating surface, eliminating the need for a separate washer and reducing the risk of surface damage or fastener loosening under vibration.
- Broad Cross-Platform Fitment — Confirmed for GA-9.7, SP2, SP213H20, SP2S13H20, SP2S20H20, SP2CE13H20, SP2SCE13H20, SP2SCE20H20, SP2S20H20A, SP213H20A, CS8CE13H20, CS8CE20H20, CC813H20, CC8CE13H20, CS813H20, CS820H20, CUTTER3, SGW-250SS, and N35244 models.
- Vibration-Resistant Retention — The flanged bearing surface resists loosening in high-vibration environments typical of concrete cutting, paving, and generator operation, maintaining joint integrity over extended run cycles.
- Single-Part Serviceability — Stocked as an individual replacement fastener so technicians can replace a single bolt without sourcing a full hardware kit, keeping service efficient and cost-effective.
A flange bolt combines a standard hex bolt with an integrated washer-like flange beneath the head. This flange spreads the clamping load over a wider area than a plain bolt head, reducing the chance of fastener pull-through or surface deformation — particularly important on aluminum housings and thin steel panels common in saws and generators. When a flange bolt stretches, corrodes, or shears, the clamped joint can shift or separate, leading to misalignment, vibration-induced wear, or outright component failure. Replacing a damaged or missing fastener with the correct OEM specification bolt restores the designed clamping force and keeps critical assemblies securely located.
Part Details
| Part Number | 90104GF6000 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Flange Bolt 6x20 |
Compatibility & Fitment
| Name | Model |
|---|---|
| Portable Generators | GA-9.7 |
| Stow Pavement Saws | CS8CE13H20 |
| Stow Pavement Saws | CS8CE20H20 |
| Stow Pavement Saws | CC813H20 |
| Stow Pavement Saws | CS820H20 |
| Flat Saws | SP213H20A |
| Flat Saws | SP2S20H20A |
| Flat Saws | SP2SCE13H20 |
| Flat Saws | SP213H20 |
| Flat Saws | SP2S13H20 |
| Flat Saws | N35244 |
| Welders | SGW-250SS |
| Flat Saws | SP2CE13H20 |
| Flat Saws | SP2SCE20H20 |
| Flat Saws | SP2 |
| Flat Saws | SP2S20H20 |
| Stow Pavement Saws | CUTTER3 |
| Stow Pavement Saws | CC8CE13H20 |
| Stow Pavement Saws | CS813H20 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
