The Genie 10597GT is a genuine OEM Hex Head Cap Screw, 1/2-13 x 1.25 GR5, built for an exceptionally wide range of Genie equipment including GS scissor lifts, S and Z series boom lifts, GTH telehandlers, and multiple Genie personnel and material lift lines. As a direct OEM replacement, this screw is manufactured to the same dimensional and grade specifications as the original hardware installed at the factory. The 1/2-13 thread pitch and Grade 5 rating are matched exactly to the fastener positions this part is designed to fill, so it seats and torques correctly without substitution or improvisation. Cross-reference part number 10597GT against your machine's parts manual to confirm it is the correct fastener for your specific application and serial range.
Key Features
- Grade 5 Strength Rating — Meets the tensile and shear requirements of the original fastener specification, delivering the clamping force the joint was engineered to carry.
- Exact Thread and Dimension Match — The 1/2-13 coarse thread and 1.25-inch grip length are identical to the OEM hardware, so this screw seats flush and torques to spec without rework.
- Genuine OEM Part — Sourced directly through Genie's authorized parts network, ensuring material grade, plating, and dimensional tolerances align with the original design intent.
- Broad Equipment Compatibility — Fits GS scissor lifts, S and Z series booms, GTH telehandlers, and a wide range of Genie personnel and material lift models, making it a practical stocking item for mixed Genie fleets.
- Structural Integrity Where It Counts — A fastener that is the wrong grade, thread pitch, or length can compromise joint integrity. Using the correct OEM screw keeps the assembly within its designed load and safety parameters.
A hex head cap screw is a structural fastener that clamps two or more components together under a controlled clamping load applied by torquing the hex head. The grade rating — Grade 5 in this case — defines the screw's tensile strength and its ability to resist loosening, stripping, or shear under dynamic loads and vibration, conditions common in mobile aerial equipment. Using a fastener of the wrong grade or incorrect thread engagement can allow joint movement, accelerate wear on mating components, or lead to connection failure. Replacing a worn or damaged fastener with the correct OEM specification part restores the joint to its original engineered condition.
Part Details
| Part Number | 10597GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Cap Screw, 1/2-13 x 1.25 GR5 |
Compatibility & Fitment
| Name | Model |
|---|---|
| AWP Super Series | AWP Super Series |
| Superlift Advantage | Superlift Advantage |
| Superlift Contractor | Superlift Contractor |
| Super Tower | Super Tower |
| IWP Super Series | IWP Super Series |
| AWP Super | AWP Super |
| DPL-25S | DPL-25S |
| DPL-30S | DPL-30S |
| DPL-35S | DPL-35S |
| Powered Superlift Advantage | Powered Superlift Advantage |
| DPL | DPL |
| PLC PLI | PLC PLI |
| AWP | AWP |
| IWP | IWP |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-100HD | S-100HD |
| S-120HD | S-120HD |
| S-40 | S-40 |
| S-45 | S-45 |
| S-3800 | S-3800 |
| S-3200 | S-3200 |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| S-80 | S-80 |
| S-85 | S-85 |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-1530 | GS-1530 |
| GS-1930 | GS-1930 |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GTH-844 | GTH-844 |
| GTH-1056 | GTH-1056 |
| Z-60/34 | Z-60/34 |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-135/70 | Z-135/70 |
| Z-51/30J | Z-51/30J |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-80/60 | Z-80/60 |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J IC | Z-45/25J IC |
| ZX-135/70 | ZX-135/70 |
| Z-30/20 N | Z-30/20 N |
| Z-34/22 IC | Z-34/22 IC |
| Z-45/22 | Z-45/22 |
| Z-34 IC | Z-34 IC |
| Z-30/20N RJ | Z-30/20N RJ |
| Z-45/22 MP | Z-45/22 MP |
| Z-25/8 | Z-25/8 |
| Z-20/8 | Z-20/8 |
| Z-20/8N | Z-20/8N |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
