The Genie 6096GT is a genuine OEM Hex Head Cap Screw, 1/2-13 x 2 GR5 built for a wide range of Genie equipment, including S and Z series boom lifts, GS series scissor lifts, AL and RL series light towers, and select material lifts and personnel lift lines. As a genuine OEM part, this screw is manufactured to the exact dimensional and grade specifications Genie requires, ensuring a correct fit at every fastening point it serves. Cross-reference part number 6096GT against your machine's parts manual to confirm it is the right fastener for your application before ordering.
Key Features
- Grade 5 Strength Rating — The GR5 designation confirms this screw meets the tensile and proof-load requirements for medium-strength fastener applications, providing the holding power the joint demands.
- Exact OEM Thread Specification — Cut to a 1/2-13 UNC thread form and 2-inch grip length, this screw installs directly into any position calling for a 1/2-13 x 2 fastener with no modification to the mating hardware.
- Broad Equipment Compatibility — A single part number covers fastener positions across Genie S and Z series boom lifts, GS series scissor lifts, AL and RL light towers, and multiple Genie lift and personnel-lift lines.
- Genuine Genie OEM Part — Sourced directly through the Genie OEM supply chain, this screw carries the correct part number, grade marking, and dimensional conformity expected for service and maintenance work.
- Structural Joint Integrity — A correctly torqued, properly graded fastener keeps structural and mechanical joints secure. A stripped, incorrect-grade, or wrong-length screw compromises joint clamping force and can allow movement in assemblies designed to be fixed.
A hex head cap screw is a fully threaded or partially threaded fastener driven by a wrench on its six-sided head, used to clamp two or more components together at a defined torque. The Grade 5 rating indicates the material has been heat-treated to meet recognized minimum tensile strength values, making it appropriate for structural and mechanical joints across aerial equipment and light-tower frames, brackets, and assemblies. When a fastener in one of these positions is damaged, missing, or replaced with an incorrect grade or length, the joint loses the clamping force it was designed to carry — using the correct OEM replacement is the straightforward way to restore the assembly to its intended condition.
Part Details
| Part Number | 6096GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Cap Screw, 1/2-13 x 2 GR5 |
Compatibility & Fitment
| Name | Model |
|---|---|
| AL4000 | AL4000 |
| AL5000 | AL5000 |
| AL5 with Vertical Mast | AL5 with Vertical Mast |
| AL4 | AL4 |
| RL4 | RL4 |
| AL5 | AL5 |
| AL4L | AL4L |
| AL5L | AL5L |
| AL5HT | AL5HT |
| Super Tower | Super Tower |
| Genie Powered Superlift | Genie Powered Superlift |
| CWP Super Series | CWP Super Series |
| PLM | PLM |
| DPL | DPL |
| MIX-N-MATCH | MIX-N-MATCH |
| Genie Superlift | Genie Superlift |
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-100HD | S-100HD |
| S-120HD | S-120HD |
| S-40 | S-40 |
| S-45 | S-45 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-3800 | S-3800 |
| S-3200 | S-3200 |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GS-2669BE | GS-2669BE |
| GS-3369BE | GS-3369BE |
| GS-4069BE | GS-4069BE |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-2669DC | GS-2669DC |
| GS-3369DC | GS-3369DC |
| GS-4069DC | GS-4069DC |
| GS-2669RT | GS-2669RT |
| GS-3369RT | GS-3369RT |
| GS-4069RT | GS-4069RT |
| TZ-50/30 | TZ-50/30 |
| TZ-34/20 | TZ-34/20 |
| TZ-50 | TZ-50 |
| Z-60/34 | Z-60/34 |
| Z-135/70 | Z-135/70 |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J IC | Z-45/25J IC |
| ZX-135/70 | ZX-135/70 |
| Z-45/22 | Z-45/22 |
| Z-80/60 | Z-80/60 |
| Z-30/20HD | Z-30/20HD |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
