The Genie 824064GT is a genuine OEM Hex Head Cap Screw, 1/4-20 x 2.25, Grade 8, zinc alloy galvanized, designed for Genie GS scissor lifts, S series telescopic boom lifts, and Z series articulating boom lifts. As a genuine Genie part, it meets the exact thread pitch, grade, and coating specifications called out in the original parts manual. This screw fits a wide range of Genie equipment including the GS-2632, GS-4047, GS-5390, S-60 XC, S-65 TRAX, Z-45/25, Z-62/40, and many additional models across all three families. Cross-reference part number 824064GT against your machine's parts manual to confirm it is the correct fastener for your application before ordering.
Key Features
- Grade 8 Strength with Zinc Alloy Galvanized Coating — Meets the tensile and shear requirements of the original specification, with a zinc alloy galvanized finish that resists corrosion in outdoor and demanding jobsite environments.
- Exact Thread and Length Match — Cut to 1/4-20 thread pitch and 2.25-inch length, this screw installs directly into the factory-threaded locations without recutting, chasing, or shimming.
- Broad Genie Fleet Coverage — A single part number that spans Genie GS scissor lifts, S series telescopic booms, and Z series articulating booms, making it a practical stock item for mixed Genie fleets.
- Structural Fastener Integrity — A correct-grade fastener at the correct torque holds assemblies within their designed load and movement tolerances. An undergrade or incorrect-length substitute can back out, strip, or fail under cyclic loading.
- Genuine OEM Part — Supplied directly in the Genie parts program, ensuring the grade marking, coating, and dimensional tolerances match what the machine was built with at the factory.
A hex head cap screw is a fully threaded or partially threaded fastener used to clamp two or more components together at a defined preload. On aerial work platforms, structural and panel fasteners like this one are torqued to specific values to keep covers, guards, and structural members secure through the vibration and movement cycles the machine experiences in daily operation. When a screw of the wrong grade, length, or coating is used as a replacement, it may not develop or hold the required clamp load, increasing the risk of loosening over time. Using the correct OEM fastener — right grade, right thread, right length — ensures the joint performs as the engineers intended throughout the service life of the assembly.
Part Details
| Part Number | 824064GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Cap Screw, 1/4-20 x 2.25, Grade 8, Zinc Alloy Galvanized |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| S-65 XC | S-65 XC |
| S-60 J | S-60 J |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-4047 | GS-4047 |
| GS-1932 | GS-1932 |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-4046 | GS-4046 |
| Z-62/40 | Z-62/40 |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 N | Z-34/22 N |
| Z-45 XC | Z-45 XC |
| Z-34/22 IC | Z-34/22 IC |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
