The Wacker Neuson Crankcase Complete is a genuine OEM component designed for a wide range of Wacker Neuson equipment, including CT36-6 walk-behind concrete trowels, VP and WP series single-direction vibratory plate compactors, BPU reversible vibratory plates, GP2600 portable generators, PG3 dewatering pumps, and BFS floor saws. As a factory-sourced assembly, the is manufactured to the same specifications as the original unit, ensuring a direct, like-for-like fit across every compatible model. This crankcase complete ships as a full assembly, simplifying the rebuild or replacement process on the bench. If you're servicing engine-powered Wacker Neuson equipment and need confidence in your parts source, the is the correct OEM choice.
Key Features
- Full OEM Casting and Tolerancing — Manufactured to Wacker Neuson's original bore dimensions and wall thickness specifications, ensuring the crankshaft, bearings, and seals seat correctly on assembly.
- Complete Assembly — Supplied as a Crankcase Complete, meaning all machined mating surfaces are pre-finished and ready for installation without secondary machining or fitment adjustment.
- Broad Cross-Platform Fitment — Compatible with CT36-6 trowels, VP/WP vibratory plates, BPU2540 reversible plates, GP2600 generators, PG3 dewatering pumps, and BFS floor saws — confirm your model number before ordering.
- Structural Engine Integrity — A correctly fitted crankcase maintains proper oil retention and bearing alignment; a cracked or worn housing leads to oil loss, bearing failure, and complete engine seizure.
- Genuine OEM Sourcing — Sourced directly through the Wacker Neuson OEM parts channel, carrying the correct part number 5000205108 for straightforward verification against your machine's parts manual.
The crankcase is the primary structural housing of a small engine — it encloses the crankshaft, supports the connecting rod bearings, and forms the sealed cavity that retains engine oil. Every major rotating component in the lower end of the engine depends on the crankcase for precise alignment; if the housing is cracked, warped, or its bearing bores are worn oversize, the engine cannot maintain oil pressure or hold rotating tolerances, leading to rapid internal wear. Replacing a damaged or failed crankcase with a complete, properly dimensioned OEM assembly like the 5000205108 restores the structural foundation of the engine and allows all mating components to function as intended.
Part Details
| Part Number | 5000205108 |
|---|---|
| Old Part Number | 0205108 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Crankcase Complete |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| Premium Portable Generator | GP2600 | 5000620088, 5000620116 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| Single Direction Plate | VPR70 | 5000006909 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000009547, 5000630066 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Floor Saw | BFS 12 | 5000630092 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saws | BFS 614B | 5000009526 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
