The Wacker Neuson 5100015853 is a genuine OEM Right Shockmount Bracket designed for BS50, BS60, and BS70 series vibratory rammers. This part fits an extensive range of BS-series rammer configurations — including BS50-2, BS50-2i, BS50-4s, BS50-4As, BS60-2, BS60-2i, BS60-4s, BS60-4As, BS70-2, BS70-2i, BS70-4As, BS65-V, and DS70 models — making it a widely applicable structural component across the Wacker Neuson rammer lineup. As a genuine OEM replacement, part 5100015853 is sourced directly through Wacker Neuson's authorized parts program, ensuring it meets the same standards as the original component. Keeping this bracket in good condition is essential to maintaining proper isolation and machine integrity on your rammer.
Key Features
- Genuine OEM Construction: — Manufactured to the same structural specifications as the original bracket, ensuring correct load-bearing geometry and mount-point alignment for the shockmount assembly.
- Drop-In Replacement: — Matches original hole patterns and mounting profiles on BS50, BS60, and BS70 rammer frames, so installation follows the standard service procedure without rework.
- Broad BS-Series Compatibility: — Fits a wide range of 2-stroke, 4-stroke, and battery-assisted rammer variants across the BS50, BS60, BS70, BS65-V, and DS70 families, covering multiple shoe sizes and altitude configurations.
- Structural Integrity for Vibration Isolation: — A correctly fitted bracket keeps the shockmount properly positioned, allowing the isolation system to absorb operating vibration rather than transferring it to the upper frame and operator handle.
- Operator Vibration Compliance: — Shockmount bracket condition directly affects handle vibration levels; a cracked or loose bracket can push transmitted vibration beyond safe operating thresholds, making timely replacement important for HAV compliance.
The shockmount bracket is a structural component that anchors the vibration isolation mount between the rammer's lower drive section and its upper frame. Its job is to hold the shockmount in the correct position so that the rubber or elastomeric isolator can do its work — absorbing the high-frequency impact energy generated during compaction and preventing it from traveling up into the handlebars and operator's hands. When the bracket cracks, bends, or breaks free, the isolator loses its anchor point, vibration transmission increases sharply, and the upper frame may begin to contact the lower unit directly, accelerating wear across surrounding components. Replacing a damaged Right Shockmount Bracket promptly restores the isolation system to its intended performance and protects both the machine and the operator.
Part Details
| Part Number | 5100015853 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Right Shockmount Bracket |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS 50-2i, 250 mm shoe, High Altitude | BS50-2i | 5200000659, 5200000657, 5200000658, 5200000642, 5200000661, 5200000660, 5200000643, 5200000678, 5200011099, 5200000687, 5100014907, 5200025429, 5200025428, 5100016650, 5100016648, 5100016649 |
| BS60-2i RAMMER, 11" PLASTIC SHOE | BS60-2i | 5200000645, 5200000646, 5200000664, 5200000665, 5200000682, 5200000689, 5200000690, 5100014908 |
| BS70-2i Vibratory Rammer, 11" Plastic Shoe | BS70-2i | 5200000650, 5200000672, 5200000649, 5200000673, 5100014909, 5100016653 |
| BS 50-4As 280 mm shoe | BS50-4As | 5100015099, 5200018219, 5200018226, 5100027197, 5100025357 |
| BS60-4As Vibratory Rammer, 11" Plastic Shoe | BS60-4As | 5200014910, 5100015123, 5200018232, 5200018233, 5200018231, 5100027198 |
| 280/11in Shoe, Vibratory Ramme r | BS50-2 | 5200000677, 5200000653, 5200000652, 5200000655, 5200000685, 5200000656, 5200000686, 5200000654, 5200000641, 5100016646, 5100014171, 5100016645, 5100016644, 5100016647 |
| BS 70-4As 280 mm shoe | BS70-4As | 5100015124, 5100015126, 5100027199 |
| 280/11in Shoe, Vibratory Ramme r | BS50-4s | 5200000679, 5200000662, 5200000680, 5200000644 |
| 280/11in Shoe, Vibratory Ramme r | BS60-2 | 5200000681, 5200000663, 5200000688, 5200019205, 5200000666, 5100014847 |
| BS 70-2, 330 mm shoe | BS70-2 | 5200000671, 5200000684, 5200000670, 5100014905, 5100016652, 5200000676 |
| 2-stroke rammer BS65V, 280 mm shoe | BS65-V | 5200000669, 5100016651 |
| BS60-4s RAMMER, 11" PLASTIC SHOE, HI-ALTITUDE | BS60-4s | 5200000648, 5200000647, 5200000667, 5200000683, 5200000668, 5200000675, 5200000674, 5200011110, 5200011111 |
| DS70H Vibratory Rammer, 13" Plastic Shoe EPA | DS70 | 5200010976 |
| 280/11in Shoe, Vibratory Ramme r | MS54 | 5200013518 |
| BS60-4s RMR 11 PL SHOE,NO PURGE,HA,42 | BS60-4 | 5200022984 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
