The Wacker Neuson is a genuine OEM Right Shockmount Bracket designed for the BS50, BS60, and BS70 series vibratory rammers. As a direct-fit OEM component, it installs exactly as the original, restoring the isolation system that protects both the operator and the machine's upper assembly from impact forces generated during compaction. This part covers an extensive range of BS-series rammer configurations — including 2-stroke, 4-stroke, and As-series models across multiple shoe sizes and altitude variants — making it one of the most widely applicable structural components in the BS rammer lineup.
Key Features
- Genuine OEM Structural Integrity — Manufactured to Wacker Neuson's original material and geometry specifications, ensuring the bracket delivers the correct mounting rigidity and vibration-damping performance for the shockmount system.
- Direct Bolt-On Installation — Matches original mounting hole patterns and bracket profile, so it installs into the rammer's upper housing without modification or fabrication.
- Broad BS-Series Compatibility — Fits a wide range of BS50, BS60, and BS70 vibratory rammers, including 2-stroke (BS50-2, BS60-2, BS70-2), fuel-injected (BS50-2i, BS60-2i, BS70-2i), 4-stroke As-series (BS50-4As, BS60-4As, BS70-4As), and 4-stroke s-series (BS50-4s, BS60-4s) models.
- Protects the Upper Assembly — A correctly fitted shockmount bracket maintains proper separation between the rammer's power unit and its guide handle assembly, preventing stress fractures and premature wear in surrounding components caused by uncontrolled vibration transfer.
- Operator Vibration Control — The right shockmount bracket is a critical part of the hand-arm vibration (HAV) isolation system; keeping it in good condition directly supports compliance with operator vibration exposure limits on regulated jobsites.
The shockmount bracket is a structural mounting component that anchors the vibration-isolating shockmount assembly to the rammer's upper housing. Vibratory rammers generate intense, repetitive impact forces during operation, and the shockmount system — held in place by this bracket — acts as a buffer between the compacting lower mass and the engine/guide handle assembly above it. When the bracket cracks, deforms, or loosens, the isolation layer is compromised: vibration transfers directly into the upper assembly, accelerating wear on surrounding hardware, degrading handle control, and increasing operator vibration exposure. Replacing a damaged bracket promptly restores the mechanical separation the machine was designed to maintain.
Part Details
| Part Number | 5200003426 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Right Shockmount Bracket |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS50-2i Vibratory Rammer, 11" Plastic Shoe | BS50-2i | 5200000642, 5200000643, 5200000657, 5200000658, 5200000659, 5200000660, 5200000661, 5200000678, 5200000687, 5200011099, 5100014907, 5100016648, 5100016649, 5100016650, 5200025428, 5200025429 |
| BS60-2i RAMMER, 11" PLASTIC SHOE | BS60-2i | 5200000645, 5200000646, 5200000664, 5200000665, 5200000682, 5200000689, 5200000690, 5100014908 |
| BS70-2i Vibratory Rammer, 13" Plastic Shoe | BS70-2i | 5200000649, 5200000650, 5200000672, 5200000673, 5100014909, 5100016653 |
| 280/11in Shoe, Vibratory Ramme r | BS50-2 | 5200000677, 5200000652, 5200000653, 5200000655, 5200000656, 5200000685, 5200000686, 5200000641, 5200000654, 5100014171, 5100016644, 5100016645, 5100016646, 5100016647 |
| BS60-4As Vibratory Rammer, 11" Plastic Shoe | BS60-4As | 5200014910, 5200018232, 5200018231, 5200018233, 5100015123 |
| BS50-4As 11IN | BS50-4As | 5200018219, 5200018226, 5100015099, 5100025357 |
| 2-stroke rammer BS65V, 280 mm shoe | BS65-V | 5200000669, 5100016651 |
| BS 70-2, 330 mm shoe | BS70-2 | 5200000671, 5200000670, 5200000684, 5100014905, 5100016652, 5200000676 |
| 280/11in Shoe, Vibratory Ramme r | BS50-4s | 5200000679, 5200000644, 5200000662, 5200000680 |
| 280/11in Shoe, Vibratory Ramme r | BS60-2 | 5200000681, 5200000663, 5200000688, 5200019205, 5100014847, 5200000666 |
| BS60-4s Vibratory Rammer, 11" Plastic Shoe 40 | BS60-4s | 5200000647, 5200000648, 5200000667, 5200000668, 5200000683, 5200000674, 5200000675, 5200011110, 5200011111 |
| 280/11in Shoe, Vibratory Ramme r | MS54 | 5200013518 |
| BS 70-4As 280 mm shoe | BS70-4As | 5100015124, 5100015126 |
| BS60-4s RMR 11 PL SHOE,NO PURGE,HA,42 | BS60-4 | 5200022984 |
| 280/11in Shoe, Vibratory Ramme r | ES50 | 5200013514, 5200013515 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
