The Wacker Neuson Grommet is a genuine OEM component designed for a wide range of Wacker Neuson equipment families, including PDT and PDI diaphragm trash pumps, VP, WP, AP, and BPS series single-direction vibratory plate compactors, CT series walk-behind concrete trowels, and PG2A portable generators. As a direct OEM replacement, part is manufactured to the same specifications as the original, ensuring a correct fit across every compatible model. This grommet is stocked to support both routine maintenance and repairs across one of the broadest fitment ranges in the Wacker Neuson parts catalog.
Key Features
- Genuine OEM Material Integrity — Molded to the exact durometer and dimensional profile of the original, ensuring the grommet seats, seals, and cushions correctly without cracking or deforming under operating vibration and temperature cycles.
- Drop-In Installation — Matches the original mounting aperture geometry, so 5000070979 presses or snaps into place exactly as the factory-installed part did — no trimming or modification needed.
- Broad Multi-Family Fitment — Confirmed for PDT2A and PDT3A diaphragm trash pumps, PDI2A and PDI3A inline diaphragm trash pumps, VP1030/VP1135 and WP1235 vibratory plates, BPS1030/BPS1135/BPS1340 vibratory plates, AP1135A battery-powered plates, CT24 and CT30 walk-behind concrete trowels, and PG2A generators.
- Vibration and Abrasion Resistance — Grommets in compaction and pump equipment are subjected to continuous vibration loads; a degraded grommet allows metal-to-metal contact or cable chafing that accelerates wear on surrounding components.
- Wire and Hose Protection — Properly seated, this grommet prevents insulation damage to wiring or hose wear where cables and lines pass through panel cutouts — a common cause of intermittent electrical faults and fluid leaks.
A grommet is a small but critical protective insert fitted into a hole or cutout in a metal panel or housing. Its job is to create a smooth, cushioned edge that protects wiring, hoses, or cables passing through the opening from being cut or chafed by raw metal edges, and in some applications to provide a light seal against dust or moisture ingress. In high-vibration equipment like vibratory plate compactors and diaphragm pumps, grommets also absorb and isolate mechanical vibration, preventing it from transferring directly to wires or tubing. When a grommet cracks, hardens, or pulls free, the unprotected edges can quickly damage wiring insulation or hose walls, leading to electrical faults, fluid leaks, or premature component failure elsewhere in the machine.
Part Details
| Part Number | 5000070979 |
|---|---|
| Old Part Number | 0070979 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Grommet |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| 50mm/2in Diaphragm Trash Pump | PDT2A | 5000007610, 5000007611, 5000620769 |
| 75mm/3in Diaphragm Trash Pump | PDT3A | 5000007614, 5000007615, 5000007616, 5000620773 |
| 50mm/2in Inline Diaphragm Tras h Pump | PDI2A | 5000007624, 5000007625 |
| 75mm/3in Inline Diaphragm Tras h Pump | PDI3A | 5000007628, 5000007629, 5000009407, 5000620775 |
| PG2A | PG2A | 5000007658, 5000009054 |
| CT24-4A Trowel | CT24-4A | 5000620105 |
| 610mm/24 inch Walk-behind Trow el | CT24-4A EU | 5000620849 |
| VP1135AW VIBROPLATE | VP1135AW | 5000009058, 5000630060 |
| 762mm/30in CE Walk-behind Trow el | CT30ADT-E | 5000007587, 5000008002 |
| 762mm/30in CE Walk-behind Trow el | CT30ADT | 5000008005, 5000008001, 5000008197 |
| VP1135A VIBROPLATE | VP1135A | 5000009057, 5000630059, 5100029066, 5100018353 |
| Single direction vibratory plate WP1235A | WP1235A | 5000630016 |
| Single Direction Plates | AP1135A | 5000009519 |
| Single Direction Plates | WP1235Aw | 5000630103 |
| Single Direction Plates | WP1235Aw-L | 5000630104, 5000630105 |
| Single Direction Plates | WP1235Aw-LL | 5000630122 |
| BPS1340Aws | BPS1340Aws | 5100060129, 5100067726 |
| PDI2A(I) | PDI2A(I) | 5000620772 |
| PDI3A(I) | PDI3A(I) | 5000620776 |
| VP1135A | VP1135A US | 5100029064, 5100018351 |
| BPS1030Aw | BPS1030Aw | 5100058916 |
| BPS1135Aw | BPS1135Aw | 5100059657 |
| BPS1030A | BPS1030A | 5100059658 |
| BPS1340Aw | BPS1340Aw | 5100059659 |
| BPS1135A | BPS1135A | 5100059662 |
| BPS1340A | BPS1340A | 5100059906 |
| VP1135AWSingle Direction Vibratory Plate | VP1135Aw US | 5100018350, 5100029063 |
| VP1135Aw | VP1135Aw | 5100029065, 5100018352 |
| Single direction vibratory plate VP1030Aw | VP1030Aw | 5100018356 |
| Single direction vibratory plate VP1030A | VP1030A | 5100018357 |
| Vibration Plate | VP1135Aw CN | 5100039666 |
| Vibratory Plate BPS1030Aw US | BPS1030Aw US | 5100080503 |
| Vibratory Plate BPS1030A US | BPS1030A US | 5100080504 |
| BPS1135Aw | BPS1135Aw US | 5100080505 |
| BPS1135A | BPS1135A US | 5100080506 |
| BPS1340Aw | BPS1340Aw US | 5100080507 |
| BPS1340A | BPS1340A US | 5100080508 |
| Vibratory Plate BPS1030Aw EU | BPS1030Aw EU | 5100084343 |
| Vibratory Plate BPS1030A EU | BPS1030A EU | 5100084344 |
| Vibratory Plate BPS1135Aw EU | BPS1135Aw EU | 5100084347 |
| Vibratory Plate BPS1135A EU | BPS1135A EU | 5100084348 |
| Vibratory Plate BPS1340Aw EU | BPS1340Aw EU | 5100084349 |
| Vibratory Plate BPS1340A EU | BPS1340A EU | 5100084350 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
