The Wacker Neuson 5000103541 is a genuine OEM Countersunk Bolt designed for the BS and DS series vibratory rammers, including the BS50-2, BS50-4, BS60-2, BS60-4, BS70-2, BS70-4As, and DS70 families. As a genuine OEM part, the 5000103541 is manufactured to the same specifications as the original hardware installed at the factory, ensuring a direct, exact-fit replacement every time. This countersunk bolt services an exceptionally wide range of Wacker Neuson rammer models — covering two-cycle, four-stroke, oil-injected, and diesel variants — making it a smart stocking item for dealers, rental fleets, and service shops that support multiple machine configurations. Confirm your machine's model number against the fitment list before ordering to ensure compatibility.
Key Features
- Genuine OEM Hardware Grade — Manufactured to Wacker Neuson's original torque and shear specifications, ensuring the bolt holds securely under the high-vibration operating conditions typical of vibratory rammers.
- Countersunk Profile for Flush Seating — The countersunk head sits flush with the mating surface on installation, preventing interference with moving components and maintaining the structural integrity of the assembly.
- Broad Rammer Family Coverage — Compatible with BS50, BS60, BS65, BS70, and DS70 series rammers across two-cycle, four-stroke, oil-injected, diesel, and variable-speed configurations, including both standard and EU-spec units.
- Vibration-Resistant Retention — A loose or worn countersunk bolt in a rammer assembly can allow fastened components to shift or detach during operation; replacing with a correctly spec'd OEM bolt restores secure clamping and prevents premature wear on surrounding parts.
- Direct OEM Source — Part number 5000103541 is sourced directly from Wacker Neuson, so you receive the same part supplied through authorized service channels — no substitutions or cross-referencing guesswork.
A countersunk bolt is a fastener with a flat, tapered head designed to sit flush with or below the surface of the material it secures. In vibratory rammers, fasteners like the 5000103541 are used throughout the machine's structural and mechanical assemblies, where the flush-mount profile prevents the bolt head from protruding into areas where it could contact or interfere with adjacent components. Because rammers operate under sustained, high-frequency vibration, fasteners in these machines are subjected to significant cyclic stress; a bolt that is worn, stripped, or incorrectly spec'd can back out over time, compromising the assembly it holds together and potentially causing secondary damage to surrounding components. Replacing a failed or damaged countersunk bolt promptly with the correct OEM part keeps the affected assembly properly secured and the machine running as intended.
Part Details
| Part Number | 5000103541 |
|---|---|
| Old Part Number | 0103541 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Countersunk Bolt |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS50-2i | BS50-2i | 5000009338, 5000620955, 5000620611, 5200003696 |
| Two-cycle Vibratory Rammer, 28 0mm\11in Shoe | BS50-2 | 5000620733, 5000620610 |
| 280mm/11in Shoe, Oil-injected Rammer | BS50-2i EU | 5000009416, 5000009414 |
| BS60-2i | BS60-2i | 5000009339, 5000009393, 5000620906, 5000620613, 5000620614 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-2 EU | 5000009410, 5000009413 |
| 330mm/13in Shoe, Oil-injected Rammer | BS70-2i | 5000009341, 5000009401, 5200000672, 5200000649, 5200000650, 5200000673, 5100014909, 5100016653 |
| Oil-injected Rammer with 280mm /11in Shoe | BS60-2i EU | 5000009419, 5000009420 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 | 5000620905, 5000620612, 5000009391 |
| Oil-injected Rammer with 330mm /13in Shoe | BS70-2i EU | 5000009426, 5000009428 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 EU | 5000009421, 5000009417, 5000009418 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 | 5000620907, 5200000671, 5200000670, 5200000684, 5000009399, 5100014905, 5100016652, 5200000676 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 EU | 5000009427, 5000009424, 5000009425 |
| Variable Speed Rammer with 280 mm/11in Shoe | BS65-V EU | 5000009423 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS50-4s | 5000620071 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS50-4s EU | 5000620811 |
| DS70 Vibratory Rammer, 11" Plastic Shoe EPA | DS70 | 5000620049, 5000620050, 5000620053, 5000620052, 5000620911, 5000620054, 5200010976, 5000009342 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS60-4s | 5000620073, 5000620072, 5000620563 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS60-4s EU | 5000620074, 5000620483, 5000620813, 5000620812 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS60-4 | 5000620109, 5000620110, 5000009340, 5000620000, 5000620051 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS50-4 | 5000620108, 5000009386 |
| Vibratory Rammer, 280mm/11in S hoe | BS600 | 5000008207, 5000009077 |
| Diesel Vibratory Rammer, 330mm /13in Shoe | DS720 | 5000008203 |
| Vibratory Rammer, 280mm/11in S hoe | BS500 | 5000009075 |
| Vibratory Rammer, 330mm/13in S hoe | BS700 | 5000009079 |
| Oil-injected Rammer, 280mm/11i n Shoe High Altitude | BS600-oi | 5000009262 |
| BS 70-4As 280 mm shoe | BS70-4As | 5100015124, 5100015126, 5100027199 |
| Oil-injected Rammer, 330mm/13i n Shoe | BS700-oi | 5000009167 |
| Variable Speed Vibratory Ramme r, 280mm/11in Shoe | BS65Y | 5000007567, 5000007566 |
| Vibratory Rammer | BS60Y | 5000007509, 5000006779 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
