The Wacker Neuson Crank Gear 64T/27.5mm is a genuine OEM component designed for the BS50, BS60, and BS70 series vibratory rammers — one of the broadest fitment ranges in the Wacker Neuson rammer lineup. Sourced directly from Wacker Neuson, part meets the same manufacturing standards as the gear installed at the factory, ensuring correct tooth count, bore dimension, and mesh alignment within the drive train. This gear fits two-cycle, four-cycle, oil-injected, and battery-assisted rammer variants across multiple shoe sizes and regional configurations, making it a high-confidence replacement for a wide range of BS-series machines. Always verify your machine number against the fitment list before ordering to confirm applicability.
Key Features
- Correct Tooth Count and Bore Dimension: — Manufactured to the specified 64-tooth profile and 27.5mm bore, ensuring proper mesh with the mating drive gear and eliminating backlash or binding during operation.
- Genuine OEM Part: — Supplied by Wacker Neuson as original equipment, meaning material grade, heat treatment, and dimensional tolerances match the gear your rammer left the factory with.
- Broad BS-Series Compatibility: — Fits BS50, BS60, and BS70 family rammers across two-cycle, four-cycle, oil-injected, and battery-assisted configurations, covering a wide range of shoe sizes and regional variants.
- Restores Full Compaction Stroke: — A worn or chipped crank gear causes irregular stroke timing and reduced compaction force; replacing it with 5000111476 restores the consistent, full-amplitude stroke your rammer is rated to deliver.
- Drop-In Installation: — Dimensionally identical to the original, the 5000111476 seats into the existing crank assembly without machining or shimming, allowing straightforward bench replacement by a qualified technician.
The crank gear is a core element of the rammer's eccentric drive system. It transfers rotational power from the engine crankshaft to the reciprocating mechanism that generates the up-and-down compaction stroke — the fundamental action that allows a vibratory rammer to densify cohesive soils and trench backfill. Because this gear operates under continuous cyclic load at high RPM, tooth wear or fatigue fracture will degrade stroke consistency, reduce compaction energy at the shoe, and — if left unaddressed — can cause secondary damage to the crankcase or connecting rod assembly. Replacing a worn crank gear promptly keeps the drive train operating within its designed load range and protects the surrounding components from accelerated wear.
Part Details
| Part Number | 5000111476 |
|---|---|
| Old Part Number | 0111476 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Crank Gear 64T/27.5mm |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS50-2i | BS50-2i | 5000009338, 5000009383, 5000620955, 5000009473, 5000620026, 5000620611, 5200000642, 5200000643, 5200000660, 5200000678, 5200003696, 5100014907, 5200025428, 5200025429, 5100028037 |
| Two-cycle Vibratory Rammer, 28 0mm\11in Shoe | BS50-2 | 5000620733, 5000620609, 5200000677, 5200000652, 5200000655, 5200000685, 5200000641, 5200000654, 5000009380, 5000009382, 5100014171, 5100016644, 5100016646 |
| BS60-2i | BS60-2i | 5000009339, 5000009393, 5000620906, 5000620613, 5000620614, 5200000645, 5200000646, 5200000664, 5200000665, 5200000682, 5200000689, 5200000690, 5100014908, 5100028038 |
| Oil-injected Rammer with 250mm /10in Shoe | BS50-2i EU | 5000009412, 5000009414, 5000009416 |
| 330mm/13in Shoe, Oil-injected Rammer | BS70-2i | 5000009341, 5000009401, 5200000649, 5200000650, 5200000672, 5200000673, 5100014909, 5100016653 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-2 EU | 5000009410, 5000009411 |
| Oil-injected Rammer with 280mm /11in Shoe | BS60-2i EU | 5000009419, 5000009420 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 | 5000620905, 5000620612, 5200000681, 5200000663, 5200000688, 5200019205, 5000009388, 5000009391, 5100014847, 5200000666 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 EU | 5000009417, 5000009421, 5000009418 |
| Oil-injected Rammer with 330mm /13in Shoe | BS70-2i EU | 5000009426, 5000009428 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 | 5000620907, 5200000671, 5200000670, 5200000684, 5000009397, 5000009399, 5100014905, 5100016652, 5200000676 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 EU | 5000009424, 5000009425, 5000009427 |
| BS60 -4s RMR,11 PL SHOE,HA 42 | BS60-4s | 5000620387, 5000620072, 5000620563, 5000620820, 5200000648, 5200000668 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS60-4s EU | 5000620074, 5000620483, 5000620812 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS60-4 | 5000620109, 5000009340, 5000620051, 5200022984 |
| Vibratory Rammer with 280mm/11 in Shoe | BS500 | 5000007550, 5000008049, 5000008048, 5000009074, 5000008204 |
| Vibratory Rammer with 280mm/11 in Shoe | BS600 | 5000007551, 5000008207, 5000009077, 5000008205, 5000009307 |
| Vibratory Rammer, 280mm/11in S hoe | BS700 | 5000008051, 5000007552, 5000008052, 5000009079, 5000008206, 5000009308 |
| Oil-injected Rammer, 280mm/11i n Shoe | BS600-oi | 5000009166, 5000009262 |
| BS 70-4As 280 mm shoe | BS70-4As | 5100015124, 5100015126, 5100027199 |
| Oil-injected Rammer, 280mm/11i n Shoe | BS500-oi | 5000009165, 5000009343 |
| Oil-injected Rammer, 330mm/13i n Shoe | BS700-oi | 5000009167, 5000009328 |
| BS60-4As Vibratory Rammer, 11" Plastic Shoe HA | BS60-4As | 5200018231, 5200018233 |
| Vibratory Rammer, 280mm/11in S hoe | BS500-4 | 5000009329 |
| Vibratory Rammer, 280mm/11in S hoe | BS600-4 | 5000009331 |
| BS50-4AS 11IN US | BS50-4As 11in US | 5100030598 |
| BS50-4As 11in | BS50-4As 11in | 5100030599 |
| BS60-4AS 11IN US | BS60-4As 11in US | 5100030605, 5100054151 |
| BS60-4As 11in | BS60-4As 11in | 5100030606, 5100037562, 5100051581 |
| BS70-4As 11in US | BS70-4As 11in US | 5100030610 |
| BS70-4As 11IN | BS70-4As 11in | 5100030611 |
| BS50-2plus 11in US | BS50-2plus 11in US | 5100030594 |
| BS50-2PLUS 11IN HA US | BS50-2plus 11in ha US | 5100030595 |
| BS50-2plus 11in | BS50-2plus 11in | 5100030596 |
| BS60-2plus 11in US | BS60-2plus 11in US | 5100030602 |
| BS60-2PLUS 11IN HA US | BS60-2plus 11in ha US | 5100030603 |
| BS60-2plus 11in | BS60-2plus 11in | 5100030604 |
| BS60-2plus 11in CN | BS60-2plus 11in CN | 5100039660 |
| BS50-2 11IN US | BS50-2 11in US | 5100030590 |
| BS50-2 11in | BS50-2 11in | 5100030591 |
| BS60-2 11IN | BS60-2 11in | 5100030600, 5100037561, 5100051580 |
| BS70-2 11in | BS70-2 11in | 5100030607 |
| BS70-2plus 11in US | BS70-2plus 11in US | 5100030608 |
| BS70-2plus 11in | BS70-2plus 11in | 5100030609 |
| AS60e | AS60e | 5100049787, 5100052267 |
| BS50-2 10IN | BS50-2 10in | 5100058346 |
| Rammer BS60-4As 11in CN | BS60-4As 11in CN | 5100058869 |
| BS65-4As 11in | BS65-4As 11in | 5100061307 |
| BS72-4As 11in | BS72-4As 11in | 5100061309 |
| BS50-2 11'' | BS50-2 11in o. bsz | 5100068309 |
| 4 stroke rammer BS50-4As, 280 mm adapter | BS50-4As 11in o. bsz | 5100068310 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
