The Wacker Neuson Fuel Tank is a genuine OEM component designed for the RT and RTL/RTK remote-controlled vibratory trench roller series, including RT56-SC, RT82-SC, RT82-SC2, RTx-SC2, RTLx-SC3, RTL82-SC3, RTKx-SC3, and RTK82-SC3 models. As a direct OEM part sourced from Wacker Neuson, the is manufactured to the same specifications as the original unit installed at the factory, ensuring a correct fit with existing fuel lines, mounting brackets, and hardware. This tank is a straightforward swap for a damaged or leaking original, restoring full fuel capacity and system integrity without the guesswork of adapting an off-spec replacement. Whether you are servicing an SC2-generation machine or a current SC3-platform roller, this part covers a wide range of configurations across the trench roller lineup.
Key Features
- OEM-Spec Construction: — Manufactured to Wacker Neuson's original material and dimensional standards, so wall thickness, fitting locations, and capacity match what the machine was built with.
- Drop-In Fitment: — Mounting points, fuel outlet, and vent positions align directly with the existing hardware on SC, SC2, and SC3 platform trench rollers — no reworking of lines or brackets needed.
- Broad Trench Roller Coverage: — Fits RT56-SC, RT82-SC, RT82-SC2, RTx-SC2, RTLx-SC3, RTL82-SC3, RTKx-SC3, and RTK82-SC3 configurations, including EU-spec and Compatec-equipped variants.
- Fuel System Integrity: — A correctly seated tank prevents fuel seepage at the mounting flange and fittings, keeping the remote-controlled roller running through a full shift without fuel starvation or spillage risk.
- Fuel Containment Safety: — An OEM-matched tank maintains proper seal and venting geometry, reducing the risk of fuel exposure on the machine frame — important on remote-controlled equipment operating near confined trench environments.
The fuel tank stores the diesel fuel supply that feeds the engine powering the trench roller's vibratory and drive systems. It must maintain a leak-free seal at all fittings and mounting points so the engine receives a consistent, uninterrupted fuel supply during compaction runs. A cracked, corroded, or poorly fitting tank can cause fuel starvation, unexpected shutdowns mid-run, or fuel leaks onto the machine frame — any of which will take the roller out of service and create a hazard in a tight trench environment.
Part Details
| Part Number | 5000153625 |
|---|---|
| Old Part Number | 0153625 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Fuel Tank |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Vibratory Trench Roller | RT82-SC2 | 5000620530, 5000620293, 5000620367, 5000620525, 5000620528, 5000620529, 5000620526, 5000620527 |
| Vibratory Trench Roller | RT82-SC2 EU | 5000620845, 5200003107 |
| Vibratory Trench Roller | RT56-SC2 | 5000620294, 5000620368 |
| Vibratory Trench Roller | RT56-SC2 EU | 5000620844 |
| Vibratory Trench Roller | RT82-SC | 5000009025, 5000620365, 5000620324, 5000620353, 5000620480, 5000620481, 5000620482 |
| Vibratory Trench Roller | RT56-SC | 5000009026, 5000620366 |
| RTLx-SC3 TRENCH ROLLER,GRN | RTLx-SC3 | 5200019251, 5200019250, 5200019254, 5200019252, 5100018515, 5100018516, 5200019253, 5100038346, 5100045091, 5100052332, 5100052269 |
| RTL82-SC3 ROLLER,SMOOTH DRUM | RTL82-SC3 | 5200019234, 5200019238, 5200019232, 5200019233, 5200019235, 5200019236, 5200019237, 5200019239, 5200022541 |
| RTKx-SC3 Trench Roller | RTK82-SC3 | 5200019257, 5200019256, 5200019255 |
| RTKx-SC3 TRENCH ROLLER,GRN | RTKx-SC3 | 5200019258, 5200019259, 5100018517, 5100018518, 5100034371, 5100037397, 5100039613, 5100052333, 5100052334, 5100052335, 5100052336, 5100052337 |
| Trench Roller | RTx-SC2 EU | 5100028378, 5200008540, 5100052330 |
| RTx-SC2 TRENCH ROLLER | RTx-SC2 | 5200008538, 5200008539, 5200018044, 5200018329 |
| Trench Roller | HTC15 | 5100065571 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
