The Wacker Neuson Air Box Filter Clip is a genuine OEM component designed for the BS50, BS60, BS70, and DS70 series vibratory rammers. This clip secures the air filter housing on the rammer's engine, ensuring the air box stays properly seated during operation. It fits an extensive range of two-cycle, four-cycle, oil-injected, diesel, and battery-assisted rammer configurations across the BS50-2, BS50-2i, BS50-4s, BS50-4As, BS60-2, BS60-2i, BS60-4s, BS60-4As, BS65-V, BS70-2, BS70-2i, BS70-4As, and DS70 model families. Sourced directly from Wacker Neuson, part is the correct OEM replacement to maintain the integrity of the air filtration system on your rammer.
Key Features
- OEM-Matched Retention Strength — Manufactured to the same clip geometry and material specification as the original, ensuring the air box lid locks and releases with the correct tension — not too stiff to service, not too loose to hold.
- Drop-In Installation — Clips directly onto the air box housing using the existing mounting points, with no drilling, trimming, or hardware changes needed.
- Broad Rammer Family Coverage — Compatible with BS50, BS60, BS65, BS70, and DS70 series rammers across two-cycle, four-cycle, oil-injected, diesel, and battery-assisted variants, covering a wide range of machine numbers and shoe configurations.
- Protects Engine Air Intake Integrity — A secure air box clip keeps the filter element properly contained and the housing sealed, preventing unfiltered air — along with dust and debris — from bypassing the filter and reaching the engine.
- Genuine Wacker Neuson OEM Part — Supplied by Wacker Neuson under part number 5000164397, this is the same clip used in original equipment assembly, not an approximation.
The air box filter clip is a small but critical fastener that holds the air filter housing securely closed on a vibratory rammer engine. When the clip is intact, it keeps the air filter element properly positioned so that all intake air passes through the filter before reaching the carburetor or fuel injection system. A broken, missing, or weakened clip allows the air box to shift or pop open during the rammer's intense reciprocating motion, which can let unfiltered air — carrying fine dust and grit from trench and compaction work — enter the engine directly. Over time, even brief exposure to unfiltered air accelerates internal engine wear, degrades performance, and can lead to premature engine failure.
Part Details
| Part Number | 5000164397 |
|---|---|
| Old Part Number | 0164397 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Air Box Filter Clip |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS50-2i | BS50-2i | 5000009338, 5000009383, 5000620955, 5000009473, 5000620026, 5000620611, 5000009332, 5200000642, 5200000643, 5200000657, 5200000658, 5200000659, 5200000660, 5200000661, 5200000678, 5200000687, 5200011099, 5200003696, 5100014907, 5100016648, 5100016649, 5100016650, 5200025428, 5200025429, 5100028037 |
| 250mm/10in Shoe, Vibratory Ram mer | BS50-2 | 5000009384, 5000620733, 5000620025, 5000620048, 5000620609, 5000620610, 5200000677, 5200000652, 5200000653, 5200000655, 5200000656, 5200000685, 5200000686, 5200000641, 5200000654, 5000009380, 5000009382, 5100014171, 5100016644, 5100016645, 5100016646, 5100016647 |
| BS60-2i | BS60-2i | 5000009339, 5000009393, 5000620906, 5000620613, 5000620614, 5200000645, 5200000646, 5200000664, 5200000665, 5200000682, 5200000689, 5200000690, 5100014908, 5100028038 |
| Oil-injected Rammer with 250mm /10in Shoe | BS50-2i EU | 5000009412, 5000009414, 5000009416 |
| 330mm/13in Shoe, Oil-injected Rammer | BS70-2i | 5000009341, 5000009401, 5200000649, 5200000650, 5200000672, 5200000673, 5100014909, 5100016653 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-2 EU | 5000009410, 5000009411, 5000009413 |
| Oil-injected Rammer with 280mm /11in Shoe | BS60-2i EU | 5000009419, 5000009420 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 | 5000620905, 5000620612, 5200000681, 5200000663, 5200000688, 5200019205, 5000009388, 5000009391, 5100014847, 5200000666 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 EU | 5000009417, 5000009421, 5000009418 |
| Oil-injected Rammer with 330mm /13in Shoe | BS70-2i EU | 5000009426, 5000009428 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 | 5000620907, 5200000671, 5200000670, 5200000684, 5000009397, 5000009399, 5100014905, 5100016652, 5200000676 |
| Variable Speed Rammer with 280 mm/11in Shoe | BS65-V EU | 5000009423 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 EU | 5000009424, 5000009425, 5000009427 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-4s | 5000620908, 5000620322, 5000620071, 5000620078, 5200000679, 5200000644, 5200000662, 5200000680 |
| BS60 -4s RMR,11 PL SHOE,HA 42 | BS60-4s | 5000620387, 5000620909, 5000620323, 5000620073, 5000620072, 5000620563, 5000620820, 5200000647, 5200000648, 5200000667, 5200000668, 5200000683, 5200000674, 5200000675, 5200011110, 5200011111 |
| Four-cycle Rammer,280mm/11in S hoe | BS60-4s EU | 5000620388, 5000620074, 5000620483, 5000620813, 5000620812, 5000620819, 5000620816, 5200003883, 5200004239 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS50-4s EU | 5000620811 |
| DS70 Vibratory Rammer, 11" Plastic Shoe EPA | DS70 | 5000620049, 5000620050, 5000620052, 5000620053, 5000620054, 5000620911, 5000009342, 5000009402, 5000009403 |
| Four-cycle Vibratory Rammer, 2 20mm/11in Shoe | BS50-4 | 5000620077, 5000620108, 5000009386 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS60-4 | 5000620109, 5000620110, 5000009340, 5000620000, 5000620051, 5200022984 |
| 280/11in Shoe, Vibratory Ramme r | MS52 | 5200008222 |
| 280/11in Shoe, Vibratory Ramme r | MS54 | 5200008223 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-4HO EU | 5000620818 |
| BS 50-4As 280 mm shoe | BS50-4As | 5100015099, 5200018219, 5200018226, 5100027197, 5100025357 |
| BS 60-4As 280 mm shoe | BS60-4As | 5100015123, 5200014910, 5200018232, 5200018231, 5200018233, 5100027198 |
| BS 70-4As 280 mm shoe | BS70-4As | 5100015124, 5100015126, 5100027199 |
| 2-stroke rammer BS65V, 280 mm shoe | BS65-V | 5200000669, 5000009396, 5100016651 |
| BS50-4AS 11IN US | BS50-4As 11in US | 5100030598 |
| BS50-4As 11in | BS50-4As 11in | 5100030599 |
| BS60-4AS 11IN US | BS60-4As 11in US | 5100030605, 5100054151 |
| BS60-4As 11in | BS60-4As 11in | 5100030606, 5100037562, 5100051581 |
| BS70-4As 11in US | BS70-4As 11in US | 5100030610 |
| BS70-4As 11IN | BS70-4As 11in | 5100030611 |
| BS50-2plus 11in US | BS50-2plus 11in US | 5100030594 |
| BS50-2PLUS 11IN HA US | BS50-2plus 11in ha US | 5100030595 |
| BS50-2plus 11in | BS50-2plus 11in | 5100030596 |
| BS50-2plus 6in (24mm) | BS50-2plus 6in (24mm) | 5100030597 |
| BS60-2plus 11in US | BS60-2plus 11in US | 5100030602 |
| BS60-2PLUS 11IN HA US | BS60-2plus 11in ha US | 5100030603 |
| BS60-2plus 11in | BS60-2plus 11in | 5100030604 |
| BS60-2plus 11in CN | BS60-2plus 11in CN | 5100039660 |
| BS50-2 11IN US | BS50-2 11in US | 5100030590 |
| BS50-2 11in | BS50-2 11in | 5100030591 |
| BS50-2 6in | BS50-2 6in | 5100030592 |
| BS60-2 11IN | BS60-2 11in | 5100030600, 5100037561, 5100051580 |
| BS70-2 11in | BS70-2 11in | 5100030607 |
| BS70-2plus 11in US | BS70-2plus 11in US | 5100030608 |
| BS70-2plus 11in | BS70-2plus 11in | 5100030609 |
| DS70 | DS70Y 13in | 5100060830, 5100030612 |
| BS50-2 10IN | BS50-2 10in | 5100058346 |
| Rammer BS60-4As 11in CN | BS60-4As 11in CN | 5100058869 |
| BS65-4As 11in | BS65-4As 11in | 5100061307 |
| BS72-4As 11in | BS72-4As 11in | 5100061309 |
| DS70 | DS70Y 13in LRC | 5100065736 |
| BS50-2 11'' | BS50-2 11in o. bsz | 5100068309 |
| 4 stroke rammer BS50-4As, 280 mm adapter | BS50-4As 11in o. bsz | 5100068310 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
