The Wacker Neuson is a genuine OEM Air Box Filter designed for the BS50, BS60, and BS70 series gasoline vibratory rammers. As a factory-sourced component, it meets the exact specifications set by Wacker Neuson for air filtration on these machines, ensuring the engine receives clean, properly filtered air on every stroke. This part covers a wide range of BS-series rammer configurations, including two-cycle, four-stroke, oil-injected, and variable-speed variants across both standard and EU-market models. If your BS50-2, BS50-4, BS60-2, BS60-4, BS70-2, BS70-2i, or BS65-V rammer needs an air box filter replacement, part is the confirmed OEM choice.
Key Features
- OEM Filtration Spec: — Sourced directly from Wacker Neuson, this Air Box Filter meets the original airflow and filtration efficiency ratings engineered for BS-series two-cycle, four-stroke, and oil-injected rammer engines.
- Drop-In Air Box Fit: — Designed to seat correctly within the existing air box housing on covered BS50, BS60, and BS70 rammer configurations — no trimming, shimming, or adaptation needed.
- Broad BS-Series Coverage: — Confirmed fitment across BS50-2, BS50-2i, BS50-4, BS50-4s, BS60-2, BS60-2i, BS60-4, BS70-2, BS70-2i, and BS65-V models, including standard, EU, and high-altitude variants.
- Engine Protection Between Services: — A functioning air box filter keeps abrasive dust and debris out of the combustion chamber; a clogged or damaged filter causes rich running, accelerated cylinder wear, and hard starting on the jobsite.
- Fuel System Integrity: — Clean intake air directly supports correct air-fuel mixture in both two-cycle and four-stroke rammer engines, maintaining consistent impact energy output across the machine's operating range.
The air box filter is the engine's primary defense against airborne dust, dirt, and debris that are unavoidable in trench compaction and soil work. It sits within the air box housing and captures particulate before it can enter the carburetor and combustion chamber. When the filter becomes clogged, airflow to the engine is restricted, causing the engine to run rich, lose power, and eventually overheat or stall under load. On vibratory rammers like the BS50 and BS60 series, which operate in tight, dust-heavy trenching conditions, regular air box filter inspection and replacement is one of the most impactful routine maintenance steps an operator can take to protect engine longevity.
Part Details
| Part Number | 5000164400 |
|---|---|
| Old Part Number | 0164400 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Air Box Filter |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS50-2i | BS50-2i | 5000009338, 5000009383, 5000620955, 5000009473, 5000620026, 5000620611, 5000009332, 5200003696 |
| 250mm/10in Shoe, Vibratory Ram mer | BS50-2 | 5000009384, 5000620733, 5000620025, 5000620048, 5000620609, 5000620610, 5000009380, 5000009382 |
| BS60-2i | BS60-2i | 5000009339, 5000009393, 5000620906, 5000620613, 5000620614 |
| Oil-injected Rammer with 250mm /10in Shoe | BS50-2i EU | 5000009412, 5000009414, 5000009416 |
| 330mm/13in Shoe, Oil-injected Rammer | BS70-2i | 5000009341, 5000009401 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-2 EU | 5000009410, 5000009411, 5000009413 |
| Oil-injected Rammer with 280mm /11in Shoe | BS60-2i EU | 5000009419, 5000009420 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 | 5000620905, 5000620612, 5000009388, 5000009391 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 EU | 5000009417, 5000009421, 5000009418 |
| Oil-injected Rammer with 330mm /13in Shoe | BS70-2i EU | 5000009426, 5000009428 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 | 5000620907, 5000009397, 5000009399 |
| Variable Speed Rammer with 280 mm/11in Shoe | BS65-V EU | 5000009423 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 EU | 5000009424, 5000009425, 5000009427 |
| Four-cycle Vibratory Rammer, 2 20mm/11in Shoe | BS50-4 | 5000620077, 5000620108, 5000009386 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS60-4 | 5000620109, 5000620110, 5000009340, 5000620000, 5000620051 |
| 280mm/11in Shoe, Variable Spee d Rammer | BS65-V | 5000009396 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS50-4s | 5000620071 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
