The Wacker Neuson Grommet is a genuine OEM component designed for the G-Series portable and skid-mounted mobile generator lineup, covering the G25, G50, G70, G85, G150, G180, G240, and G320 families. As a genuine OEM part, it is manufactured to the exact material and dimensional standards set by Wacker Neuson, ensuring a correct, lasting installation every time. Fitment spans a wide range of G-Series configurations including standard, cold weather, extended run, custom, and Hertz variants, as well as select MGT2 and MGT4 trailer packages. Verify your machine number against the fitment list to confirm compatibility before ordering.
Key Features
- OEM Material Integrity — Molded to Wacker Neuson's exact compound and durometer spec so the grommet seals and cushions correctly without cracking, compressing flat, or pulling through the panel opening over time.
- Drop-In Panel Fit — Engineered to seat flush in the factory cutout with no trimming or forcing, maintaining a clean, rattle-free seal around wiring or tubing pass-throughs.
- Broad G-Series Coverage — A single part number covers G25, G50, G70, G85, G150, G180, G240, and G320 models across standard, cold weather, extended run, custom, and Hertz configurations, including MGT2 and MGT4 trailer-mounted units.
- Protects Wiring and Hose Runs — A failed or missing grommet allows panel edges to abrade wiring insulation or hose walls, which can lead to shorts, fluid leaks, or generator shutdown. Replacing a worn grommet restores the protection that keeps conductors and lines intact.
- Electrical Safety Compliance — On generator equipment, proper wire routing protection through panel openings is a code and safety requirement. Using the correct OEM grommet keeps the installation aligned with the original design intent and applicable electrical safety standards.
A grommet is a small but critical sealing and protective insert fitted into a panel hole wherever a wire, cable, or hose passes through a metal or composite enclosure wall. Its primary job is to prevent the sharp edge of the cutout from chafing through insulation or hose material during vibration and normal operation. On Wacker Neuson G-Series generators, which run in demanding jobsite environments for extended periods, intact grommets are essential for keeping electrical conductors safely routed and enclosure seals effective. When a grommet splits, hardens, or dislodges, the exposed panel edge becomes an abrasion point that can damage wiring and introduce fault conditions into the generator's electrical system.
Part Details
| Part Number | 5000175267 |
|---|---|
| Old Part Number | 0175267 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Grommet |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Skid-mounted Mobile Generator, Custom | G70 | 5000620352, 5000620350, 5000620351, 5000009367, 5000009468, 5000620002, 5000620647, 5000620711, 5000620646, 5200001318, 5200003220, 5200006879, 5200003975, 5200003973, 5200003974, 5200014464, 5000009260, 5200004151, 5200014463, 5200014465, 5200008344, 5200008342, 5200008343, 5200008339, 5200008719, 5200008340, 5000009464, 5100025262, 5000009478, 5100025838 |
| Skid-mounted Mobile Generator | G50 | 5000009467, 5000009366, 5000620001, 5200001062, 5200001063, 5200006878, 5200001317, 5200001060, 5200001061, 5200014322, 5000009259, 5200014319, 5200014320, 5200014323, 5200017829, 5200022589, 5100042434, 5200017830, 5100042430, 5100042435, 5000620710, 5100045494, 5000620964, 5000620965, 5000620966, 5100042431, 5100042433, 5100045085, 5100045493, 5100042432, 5000009463, 5000009477, 5100025812, 5100026954, 5100029210, 5100026955, 5100026956 |
| Mobile Generator | G85 | 5000009459, 5000620003, 5000009369, 5000009310, 5000009305, 5000009465 |
| G25 GENERATOR, EXTENDED RUN TANK, SKID | G25 | 5000620709, 5000620706, 5100042510 |
| Mobile Generator | G150 | 5200001321, 5200006902, 5200025554 |
| Mobile Generator | G180 | 5200001322, 5200006903, 5200025555 |
| Mobile Generators | G240 | 5200001323, 5200006904, 5200025556 |
| G320 Generator, Standard T4i | G320 | 5000620275, 5200008718, 5200010219, 5200010260, 5200010144, 5200010145, 5200010146, 5100045191, 5100045601, 5100045602, 5200008717, 5100018533, 5100049848, 5100049849, 5200010261 |
| MGT2ED Trailer, Electric, Dual Axle, 3500LB Each | MGT2ED | 5000009304 |
| MGT2SD Trailer, Surge, Dual Axle, 3500LB Each | MGT2SD | 5000009303, 5000620932, 5200001325 |
| MGT4S Trailer, Surge, Dual Axle, 6000LB Each | MGT4S | 5200001327 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
