The Wacker Neuson 5000183356 is a genuine OEM Throttle Valve designed for the BS-series gasoline vibratory rammer line, covering a wide range of BS50-2i, BS60-2, BS60-2i, BS65-V, BS68-2, BS70-2, and BS70-2i models. As a direct OEM replacement, the 5000183356 is manufactured to the exact tolerances and material specifications of the original component, ensuring correct throttle response and fuel-air mixture control from the moment it is installed. This Throttle Valve fits an extensive range of BS-series rammer configurations — including EU, US, CN, and plus-series variants — so confirm your machine's model and serial number against the fitment list before ordering. Keeping this part in good working order is essential to maintaining full engine output and reliable compaction performance in the field.
Key Features
- Genuine OEM Throttle Bore Integrity — Manufactured to the original flow and tolerancing spec, ensuring accurate air-fuel metering that aftermarket valves may not replicate.
- Drop-In Carburetor Compatibility — Engineered to seat and seal correctly within the BS-series carburetor assembly, using the original mounting geometry for a straightforward swap.
- Broad BS-Series Coverage — Fits BS50-2i, BS60-2, BS60-2i, BS65-V, BS68-2, BS70-2, BS70-2i, and multiple sub-variants including EU, US, CN, plus, and Sunbelt configurations.
- Consistent Throttle Response — A correctly functioning throttle valve gives the operator smooth, predictable RPM control — critical for trench compaction where steady impact energy matters.
- Fuel System Safety — A worn or sticking throttle valve can cause engine over-speed or uncontrolled RPM surges; replacing it with an OEM-spec part restores safe, controlled operation.
- Direct Wacker Neuson OEM Part — Sourced from the original equipment manufacturer, carrying part number 5000183356 for straightforward cross-referencing with service manuals and parts catalogs.
The throttle valve is a precision component seated inside the carburetor body that regulates the volume of air-fuel mixture entering the engine by opening and closing in response to operator throttle input. On a vibratory rammer like the BS-series, where the engine must deliver consistent, high-frequency impact energy through demanding compaction cycles, a properly functioning throttle valve is essential to maintaining stable RPM and full compaction force. When the valve wears, warps, or sticks, the engine may surge, bog, or fail to reach operating speed — reducing compaction effectiveness and increasing operator fatigue.
Part Details
| Part Number | 5000183356 |
|---|---|
| Old Part Number | 0183356 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Throttle Valve |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS50-2i | BS50-2i | 0009383, 5100028037, 5200000643, 5200025429 |
| BS50-2i EU | BS50-2i EU | 5000009412 |
| BS50-2plus 11in ha US | BS50-2plus 11in ha US | 5100030595 |
| BS 60-2 EU | BS 60-2 EU | 0009421 |
| BS 60-2 | BS 60-2 | 0620612 |
| BS60-2 11in | BS60-2 11in | 5100030600, 5100037561, 5100051580 |
| BS60-2 EU | BS60-2 EU | 5000009417 |
| BS60-2 | BS60-2 | 5100014847, 5200000663, 5200000666, 5200000681, 5200000688, 5200019205 |
| BS60-2i EU | BS60-2i EU | 5000009419 |
| BS 60-2i | BS 60-2i | 0009339, 0620613, 0620614 |
| BS60-2i | BS60-2i | 5000009393, 5100014908, 5100028038, 5200000645, 5200000646, 5200000664, 5200000682, 5200000689, 5200000690 |
| BS60-2plus 11in US | BS60-2plus 11in US | 5100030602 |
| BS60-2plus 11in ha US | BS60-2plus 11in ha US | 5100030603 |
| BS60-2plus 11in | BS60-2plus 11in | 5100030604 |
| BS60-2plus 11in CN | BS60-2plus 11in CN | 5100039660 |
| BS65-V | BS65-V | 5100016651, 5200000669 |
| BS68-2/28 | BS68-2/28 | 5100070150 |
| BS68-2b/28 | BS68-2b/28 | 5100061969 |
| BS68-2b/28 Sunbelt | BS68-2b/28 Sunbelt | 5100070529 |
| BS 70-2 EU | BS 70-2 EU | 0009425 |
| BS70-2 11in | BS70-2 11in | 5100030607 |
| BS70-2 EU | BS70-2 EU | 5000009424, 5000009425, 5000009427 |
| BS70-2 | BS70-2 | 5100014905, 5100016652, 5200000670, 5200000671, 5200000684 |
| BS 70-2 | BS 70-2 | 5200000676 |
| BS70-2i | BS70-2i | 5200000672, 5100014909, 5100016653, 5200000649, 5200000650, 5200000673 |
| BS 70-2i | BS 70-2i | 0009341, 0009401 |
| BS70-2i EU | BS70-2i EU | 5000009426, 5000009428 |
| BS70-2plus 11in US | BS70-2plus 11in US | 5100030608 |
| BS70-2plus 11in | BS70-2plus 11in | 5100030609 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
