The Wacker Neuson Flange Screw is a genuine OEM flange screw used across a wide range of Wacker Neuson equipment, including GP2600 and GPi3200 portable generators, VP and BPU series vibratory plate compactors, PDT and PDI diaphragm trash pumps, PG dewatering pumps, and BFS floor saws. As a direct OEM replacement, the is manufactured to Wacker Neuson's exact specifications, ensuring correct thread engagement, head geometry, and clamping load for every application in this broad fitment range. This part ships as a single flange screw and is confirmed compatible with the GP2600, VP1135R, VP1550R, VP2050R, VP50X, VP60X, BFS12, BFS1214, BFS1345W, BFS1350W, BPU2540, PDT2, PDT3, PDI2, PDI3, PG2, PG3, GPi3200, and GPSi3200, among other listed models. Verifying your machine's model number and serial number against the full fitment list before ordering is always recommended.
Key Features
- Genuine OEM Thread and Flange Specification — Manufactured to Wacker Neuson's exact thread pitch, shank diameter, and integrated flange geometry for correct clamping force and surface distribution on every covered application.
- Drop-In Installation — The integrated flange eliminates the need for a separate washer, seating directly into the same bolt pattern as the original hardware for a clean, tool-matched installation.
- Broad Cross-Family Fitment — A single part number covers GP and GPi generators, VP and BPU vibratory plates, PDT and PDI diaphragm pumps, PG dewatering pumps, and BFS floor saw platforms.
- Consistent Clamping Integrity — A correctly torqued flange screw maintains joint preload and prevents loosening under vibration; a worn or incorrect fastener can lead to loose assemblies, component misalignment, or structural damage over time.
- Fuel and Fluid System Safety — On pump and generator models, fastener integrity directly affects the seal of housings and covers that retain fuel or fluid; using the correct OEM specification screw supports leak-free operation.
A flange screw combines a standard hex-head cap screw with an integral flanged bearing surface that spreads clamping load over a wider area than a plain bolt, functioning as both fastener and built-in washer in a single piece. On vibratory compaction equipment and floor saws, this design resists loosening under continuous vibration by maintaining consistent preload across the joint. When a flange screw is missing, stripped, or replaced with an incorrect fastener, joint clamping force drops, which can allow covers, guards, and housings to shift or leak — compromising both machine performance and operator safety.
Part Details
| Part Number | 5000205141 |
|---|---|
| Old Part Number | 0205141 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Flange Screw |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Premium Portable Generator | GP2600 | 5000620088, 5000620116 |
| 50mm/2in Diaphragm Trash Pump | PDT2 | 5000009494, 5000620770 |
| 75mm/3in Diaphragm Trash Pumps | PDT3 | 5000009495, 5000620774 |
| PG2 Dewatering Pump | PG2 | 5000009496, 5000009497 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| Value Vibratory Plate, 11kN, 3 50mm/13.8in | VP1135R | 5000008709, 5000009071, 5000630061 |
| Value Vibratory Plate, 11 kN, 356mm/14in | VP1135RW | 5000009251, 5000009512 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| Vibratory Soil Plate, 60 kN | VP60X | 5000009533 |
| Vibratory Soil Plate, 50 kN | VP50X | 5000009531 |
| Single Direction Plate | VPR70 | 5000006909 |
| VP50Xw-VIBROPLATE | VP50Xw | 5000630094 |
| VP60Xw-VIBROPLATE | VP60Xw | 5000630095 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| Single Direction Plate | AP1135R | 5000009518 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| Value Vibratory Plate, 11kN 356mm/14in | VP1135R-AU | 5000630102 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Floor Saw | BFS 12 | 5000630092 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Floor Saw | BFSX1214 | 5000630101 |
| 50mm/2in Diaphragm Trash Pump | PDI2 | 5000009489 |
| Portable Inverter Generator | GPi3200 | 5000620779, 5000620960, 5000620781 |
| GPSi3200 | GPSi3200 | 5000620961 |
| 75mm/3in Diaphragm Trash Pump | PDI3 | 5000009491, 5000009492 |
| Generator GH 3500 | GH3500 | 5000610079 |
| High Frequency Demolitionset | TEH 1 | 5000610241 |
| Petrol Floor Saw BFS 1350B | BFS 1350W | 5100000090, 5100004013 |
| Petrol Floor Saw BFS 1350BZ | BFS 1350Wz | 5100000092, 5100004014 |
| Petrol Floor Saw BFS 1345B | BFS 1345W | 5100001158, 5100004009 |
| Petrol Floor Saw BFS 1345BZ | BFS 1345Wz | 5100001159, 5100004010 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
