The Wacker Neuson Flange Screw is a genuine OEM component designed for the DPU80, DPU90, DPU110, and DPU130 series reversible vibratory plate compactors. As a direct OEM part, the is manufactured to the exact material and dimensional standards used in original production, ensuring it seats and clamps correctly in the assembly it was engineered for. Fitment spans a broad range of DPU-series machines — including Lec, Lem, rLec, rLem, and Lekc variants — as well as select E3000 engine/generator assemblies and the LTV6L light tower. Always confirm your machine's model number before ordering to ensure correct application.
Key Features
- Genuine OEM Material Grade — Manufactured to the same hardness and thread specification as the original production fastener, so clamping load and torque retention are not compromised.
- Direct Drop-In Replacement — Matches the original thread pitch, shank diameter, and flange geometry for correct seating without rework or modification to mating components.
- Broad DPU-Series Coverage — Compatible across DPU80, DPU90, DPU110, and DPU130 reversible plate compactor variants, including diesel-powered Lec and Lem configurations in both standard and US-market spec.
- Flange Design Prevents Loosening — The integrated flange distributes clamping force over a wider bearing surface, resisting loosening under the sustained vibration loads inherent to reversible plate compactor operation.
- Verified OEM Part Number — Sourced directly through Wacker Neuson's authorized parts network under part number 5000217828, eliminating the guesswork of third-party cross-referencing.
A flange screw is a fastener with a wide, washer-like collar integrated into the underside of the head, which spreads clamping load across a broader contact area than a standard hex bolt. In high-vibration equipment such as reversible plate compactors, standard fasteners can work loose over time as cyclic forces gradually back them out of the joint. The built-in flange acts as a locking surface, helping the fastener maintain consistent clamping force through continuous vibration cycles. A worn, stripped, or missing flange screw can allow joined components to shift or separate, leading to accelerated wear on mating parts and potential structural failure at the joint.
Part Details
| Part Number | 5000217828 |
|---|---|
| Old Part Number | 0217828 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Flange Screw |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| DPU 130Le | DPU 130Le | 5000610143 |
| DPU130Le | DPU130Le CH/US | 5000610424 |
| DPU80Lec770 | DPU80Lec770 | 5100026787 |
| DPU110Lec870 | DPU110Lec870 | 5100026869 |
| DPU80Lec670 | DPU80Lec670 | 5100027032 |
| DPU110Lec970 | DPU110Lec970 | 5100027035 |
| DPU90Lec670 | DPU90Lec670 | 5100027534 |
| DPU90Lec770 | DPU90Lec770 | 5100027536 |
| E3000 | E3000 | 5100055568, 5100056441, 5100056440 |
| DPU80Lem770 | DPU80Lem770 | 5100018444 |
| DPU110Lem870 | DPU110Lem870 | 5100018445 |
| DPU80Lem670 | DPU80Lem670 | 5100024695 |
| DPU110Lem970 | DPU110Lem970 | 5100024696 |
| DPU90Lem770 | DPU90Lem770 | 5100024731 |
| DPU110Lec970 US | DPU110Lec970 US | 5100026784 |
| DPU80rLec670 | DPU80rLec670 | 5100027033 |
| DPU80rLec770 | DPU80rLec770 | 5100027034 |
| DPU90Lec770 US | DPU90Lec770 US | 5100028357 |
| DPU80rLem670 | DPU80rLem670 | 5100024697 |
| DPU80rLem770 | DPU80rLem770 | 5100024698 |
| DPU110Lem970 US | DPU110Lem970 US | 5100024730 |
| DPU90Lem770 US | DPU90Lem770 US | 5100024732 |
| DPU110rLec970 | DPU110rLec970 | 5100027036 |
| DPU110rLec870 | DPU110rLec870 | 5100027077 |
| DPU110rLem970 | DPU110rLem970 | 5100024699 |
| DPU110rLem870 | DPU110rLem870 | 5100026697 |
| DPU110rLec970 US | DPU110rLec970 US | 5100026786 |
| DPU90rLec770 US | DPU90rLec770 US | 5100028359 |
| DPU110rLem970 US | DPU110rLem970 US | 5100026785 |
| DPU90rLem770 | DPU90rLem770 US | 5100028358 |
| DPU110Lekc970 | DPU110Lekc970 | 5100034515 |
| Engine/Generator cpl. | Engine/Generator cpl. | 5100039560 |
| Light Tower | LTV6L | 5100039607 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
