The Wacker Neuson 5000209764 Carburetor Float Set is a genuine OEM component designed for AP, BPS, and VP series vibratory plate compactors. This set covers an extensive range of models including the AP 1135A, AP 1550A, BPS1030A, BPS1135A, BPS1340A, BPS1550A, BPS2050A, VP1030A, VP1135A, and their respective variants. As a direct factory replacement, the 5000209764 is manufactured to the same specifications as the original part and installs exactly as the factory unit did. Keeping the carburetor float in good working order is essential to maintaining consistent fuel delivery and smooth engine performance on your compactor.
Key Features
- Genuine OEM Fuel Metering Accuracy — Factory-sourced float engineered to hold the correct buoyancy and dimensional tolerances for proper fuel bowl level control in these carburetors.
- Direct Drop-In Replacement — Matches the original float geometry and needle seat interface, allowing a straightforward swap without carburetor modification.
- Broad AP, BPS, and VP Series Coverage — A single part number supports the AP 1135A, AP 1550A, BPS1030A through BPS2050A, and VP1030A through VP1135A families, along with their regional and water-cooled variants.
- Restored Throttle Response and Idle Stability — A correctly functioning float maintains a consistent fuel level in the bowl, which directly supports stable idle and responsive throttle on vibratory plate compactors under varying load.
- Fuel System Safety — A failed or waterlogged float can cause fuel overflow and flooding, creating a fire hazard. Replacing a faulty float with a genuine OEM unit restores safe carburetor operation.
The carburetor float is a buoyant component that rides on top of the fuel inside the carburetor bowl, rising and falling with the fuel level to open and close the needle valve. When the fuel drops below the set level, the float drops and the needle valve opens to allow more fuel in; when the level is correct, the float rises and shuts the valve off. A float that is cracked, saturated, or deformed loses its buoyancy and can no longer regulate this cycle accurately, leading to engine flooding, rough running, stalling, or in severe cases, fuel overflow onto hot engine surfaces.
Part Details
| Part Number | 0209764 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Carburetor Float Set |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| AP 1135A | AP 1135A | 5000009519 |
| AP 1550A | AP 1550A | 5000009539 |
| AP 1550AW | AP 1550AW | 5000009540 |
| BPS1030A | BPS1030A | 5100059658 |
| BPS1030A US | BPS1030A US | 5100080504 |
| BPS1030A EU | BPS1030A EU | 5100084344 |
| BPS1030Aw | BPS1030Aw | 5100058916 |
| BPS1030Aw US | BPS1030Aw US | 5100080503 |
| BPS1030Aw EU | BPS1030Aw EU | 5100084343 |
| BPS1135A | BPS1135A | 5100059662 |
| BPS1135A US | BPS1135A US | 5100080506 |
| BPS1135A EU | BPS1135A EU | 5100084348 |
| BPS1135Aw | BPS1135Aw | 5100059657 |
| BPS1135Aw US | BPS1135Aw US | 5100080505 |
| BPS1135Aw EU | BPS1135Aw EU | 5100084347 |
| BPS1340A | BPS1340A | 5100059906 |
| BPS1340A US | BPS1340A US | 5100080508 |
| BPS1340A EU | BPS1340A EU | 5100084350 |
| BPS1340Aw | BPS1340Aw | 5100059659 |
| BPS1340Aw US | BPS1340Aw US | 5100080507 |
| BPS1340Aw EU | BPS1340Aw EU | 5100084349 |
| BPS1340Aws | BPS1340Aws | 5100060129, 5100067726 |
| BPS1550A | BPS1550A | 5100061215 |
| BPS1550Aw | BPS1550Aw | 5100061216 |
| BPS1550Aws | BPS1550Aws | 5100067727 |
| BPS2050A | BPS2050A | 5100061217 |
| BPS2050Aw | BPS2050Aw | 5100061218 |
| MP 15A | MP 15A | 0630318 |
| VP1030A | VP1030A | 5100018357 |
| VP1030Aw | VP1030Aw | 5100018356 |
| VP1135A US | VP1135A US | 5100018351, 5100029064 |
| VP 1135AW | VP 1135AW | 0009058 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
