The Wacker Neuson is a genuine OEM Left Shockmount Bracket designed for the BS50, BS60, and BS70 series vibratory rammers. As a direct factory replacement, this bracket carries the same part number, material specification, and mounting geometry as the original component fitted at the time of manufacture. It covers an extensive range of BS-series rammer configurations — including 2-stroke, 4-stroke, and battery-assisted models across the BS50-2, BS50-2i, BS50-4s, BS50-4As, BS60-2, BS60-2i, BS60-4s, BS60-4As, BS65-V, BS70-2, BS70-2i, BS70-4As, ES50, and MS54 families. Ordering genuine Wacker Neuson ensures the bracket interfaces correctly with the engine housing and upper frame without any guesswork on fitment.
Key Features
- Genuine OEM Construction — Manufactured to Wacker Neuson's original material and dimensional specifications, ensuring the bracket delivers the same vibration-damping performance as the part it replaces.
- Left-Side Direct Replacement — Mounts to the same bolt pattern and locating features as the factory bracket, dropping into position on the left shockmount location without rework or modification.
- Broad BS-Series Compatibility — Verified fitment across BS50, BS60, BS65, BS70, ES50, and MS54 rammer variants, including 2-stroke, fuel-injected, 4-stroke, and battery-assisted configurations in standard and high-altitude versions.
- Structural Integrity Under Repeated Impact — The shockmount bracket must withstand continuous high-frequency compaction forces; a worn or cracked bracket allows the engine assembly to shift, accelerating wear throughout the machine.
- Verified Part Number Traceability — Part number 5200003425 cross-references directly to your machine's serial number range, so you can confirm you're ordering the correct left-side bracket before the part ships.
The shockmount bracket is a structural mounting component that connects the engine and upper frame of the rammer to the lower guide rod assembly through vibration-isolating mounts. Its primary job is to absorb and redirect the high-frequency impact forces generated during compaction, protecting the engine housing, fuel system, and operator controls from excessive stress. When the bracket cracks, deforms, or loses its mounting integrity, the engine can shift out of alignment — leading to uneven wear on guide rods and shockmount pads, increased vibration transmitted to the operator, and ultimately a machine that cannot compact effectively. Replacing a damaged bracket promptly restores proper frame geometry and protects the surrounding components from secondary damage.
Part Details
| Part Number | 5200003425 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Left Shockmount Bracket |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS50-2i Vibratory Rammer, 11" Plastic Shoe | BS50-2i | 5200000642, 5200000643, 5200000657, 5200000658, 5200000659, 5200000660, 5200000661, 5200000678, 5200000687, 5200011099, 5100014907, 5100016648, 5100016649, 5100016650, 5200025428, 5200025429 |
| BS60-2i RAMMER, 11" PLASTIC SHOE | BS60-2i | 5200000645, 5200000646, 5200000664, 5200000665, 5200000682, 5200000689, 5200000690, 5100014908 |
| BS70-2i Vibratory Rammer, 13" Plastic Shoe | BS70-2i | 5200000649, 5200000650, 5200000672, 5200000673, 5100014909, 5100016653 |
| 280/11in Shoe, Vibratory Ramme r | BS50-2 | 5200000677, 5200000652, 5200000653, 5200000655, 5200000656, 5200000685, 5200000686, 5200000641, 5200000654, 5100014171, 5100016644, 5100016645, 5100016646, 5100016647 |
| BS60-4As Vibratory Rammer, 11" Plastic Shoe | BS60-4As | 5200014910, 5200018232, 5200018231, 5200018233, 5100015123 |
| BS50-4As 11IN | BS50-4As | 5200018219, 5200018226, 5100015099, 5100025357 |
| 2-stroke rammer BS65V, 280 mm shoe | BS65-V | 5200000669, 5100016651 |
| BS 70-2, 330 mm shoe | BS70-2 | 5200000671, 5200000670, 5200000684, 5100014905, 5100016652, 5200000676 |
| 280/11in Shoe, Vibratory Ramme r | BS50-4s | 5200000679, 5200000644, 5200000662, 5200000680 |
| 280/11in Shoe, Vibratory Ramme r | BS60-2 | 5200000681, 5200000663, 5200000688, 5200019205, 5100014847, 5200000666 |
| BS60-4s Vibratory Rammer, 11" Plastic Shoe 40 | BS60-4s | 5200000647, 5200000648, 5200000667, 5200000668, 5200000683, 5200000674, 5200000675, 5200011110, 5200011111 |
| 280/11in Shoe, Vibratory Ramme r | MS54 | 5200013518 |
| BS 70-4As 280 mm shoe | BS70-4As | 5100015124, 5100015126 |
| BS60-4s RMR 11 PL SHOE,NO PURGE,HA,42 | BS60-4 | 5200022984 |
| 280/11in Shoe, Vibratory Ramme r | ES50 | 5200013514, 5200013515 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
