The Genie 13066GT is a genuine OEM Hardened Flat Washer,.5 designed for an extensive range of Genie aerial lifts, telehandlers, material lifts, and light towers. Sourced directly from Genie, this washer delivers an exact match to the original hardware specification, ensuring proper load distribution and fastener performance across every application it serves. This genuine OEM part is engineered to the same standard as the hardware installed at the factory, making it a dependable choice for maintenance, repair, and scheduled service. Compatible fitment spans Genie GS scissor lifts, S and Z series boom lifts, GTH telehandlers, GR vertical mast lifts, Superlift and AWP material lifts, and TML light towers — cross-reference part number 13066GT against your parts manual to confirm the correct application before installation.
Key Features
- Hardened Construction for High-Load Applications — The hardened steel rating on this washer resists deformation under torque and clamping loads, maintaining consistent bearing surface integrity over the service life of the fastener assembly.
- Genuine OEM Part — Supplied by Genie as original equipment hardware, this washer meets the material grade and dimensional tolerances specified for use across Genie machines — no substitutions or compromises.
- Direct Drop-In Replacement — Sized at .5 in. to match the original hardware, this washer seats correctly against mating fasteners without shimming, filing, or adjustment.
- Broad Fitment Across Genie Equipment Families — A single part number covers GS scissor lifts, S and SX telescopic boom lifts, Z and ZX articulating boom lifts, GTH telehandlers, GR runabout lifts, Superlift and AWP material lifts, and TML light towers.
- Protects Fastener Integrity — A properly rated hardened washer prevents bolt heads and nuts from pulling through or gouging softer parent material, preserving thread engagement and structural connection strength at critical fastening points.
A flat washer serves as a load-spreading interface between a fastener — typically a bolt head or nut — and the surface being clamped. By distributing the clamping force over a wider area, it prevents the fastener from embedding into or damaging the mating material. In a hardened variant, the increased surface hardness is essential where high torque values, vibration, or dynamic loading are present — conditions common across aerial lifts, telehandlers, and material handling equipment. When a washer is worn, undersized, or of an incorrect hardness grade, fastener connections can loosen prematurely or allow structural movement at joints where rigidity is critical to safe machine operation.
Part Details
| Part Number | 13066GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Flat Washer, .5 Hardened |
Compatibility & Fitment
| Name | Model |
|---|---|
| TML-4000 | TML-4000 |
| TML-4000N | TML-4000N |
| AWP Super Series | AWP Super Series |
| Super-Straddle | Super-Straddle |
| Superlift Advantage | Superlift Advantage |
| Superlift Contractor | Superlift Contractor |
| IWP Super Series | IWP Super Series |
| HANDY LIFT | HANDY LIFT |
| AWP Super | AWP Super |
| GR-8 | GR-8 |
| GR-12 | GR-12 |
| GR-15 | GR-15 |
| Powered Superlift Advantage | Powered Superlift Advantage |
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-100HD | S-100HD |
| S-120HD | S-120HD |
| SX-150 | SX-150 |
| SX-180 | SX-180 |
| S-40 | S-40 |
| S-45 | S-45 |
| S-3800 | S-3800 |
| S-3200 | S-3200 |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GS-1530 | GS-1530 |
| GS-1532 | GS-1532 |
| GS-1930 | GS-1930 |
| GS-1932 | GS-1932 |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-4047 | GS-4047 |
| GS-2646 AV | GS-2646 AV |
| GS-2646 AV35 | GS-2646 AV35 |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GTH-1048 | GTH-1048 |
| GTH-1056 | GTH-1056 |
| GTH-844 | GTH-844 |
| TZ-50 | TZ-50 |
| Z-60/34 | Z-60/34 |
| Z-135/70 | Z-135/70 |
| Z-51/30J | Z-51/30J |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-80/60 | Z-80/60 |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J IC | Z-45/25J IC |
| ZX-135/70 | ZX-135/70 |
| Z-34/22 IC | Z-34/22 IC |
| Z-45/22 | Z-45/22 |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| Z-30/20HD | Z-30/20HD |
| Z-45/22 MP | Z-45/22 MP |
| Z-25/8 | Z-25/8 |
| Z-20/8 | Z-20/8 |
| Z-20/8N | Z-20/8N |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
