The Genie 13064GT is a genuine OEM Flat Washer,.625 Hardened, built for a wide range of Genie aerial lifts and telehandlers including S telescopic boom lifts, Z articulating boom lifts, GS scissor lifts, and GTH telehandlers. As a genuine OEM component, this washer is manufactured to the same specification as the original hardware installed on your machine. Cross-reference part number 13064GT against your parts manual to confirm the correct application before ordering. With broad fitment coverage spanning dozens of Genie platforms, this hardened flat washer is a practical stocking item for fleet operators and service shops alike.
Key Features
- Through-Hardened Construction — The .625 hardened specification ensures this washer resists deformation under the clamping loads typical of structural fastener joints on aerial equipment, maintaining joint integrity over time.
- Genuine OEM Part — Sourced directly through Genie's OEM supply chain, this washer matches the original material grade, hardness, and dimensional tolerances of the part it replaces.
- Drop-In Replacement — Sized to seat correctly against the fastener head or nut it was designed for, this washer installs without machining or shimming adjustments.
- Broad Fleet Coverage — Fits Genie S and Z series boom lifts, GS series scissor lifts, and GTH telehandlers, making it a versatile item to keep on hand across a mixed Genie fleet.
- Protects Mating Surfaces — Distributes clamping force evenly across the bearing surface, preventing fastener pull-through and reducing wear on the surrounding material in high-cycle service environments.
A hardened flat washer serves as a load-distribution element in bolted assemblies — spreading the clamping force of a nut or bolt head over a wider surface area to prevent localized stress, fastener pull-through, or damage to softer parent materials. The hardened designation means the washer is heat-treated to resist permanent deformation when subjected to significant torque loads, which is especially important in structural and pivot-point connections on aerial lift equipment. When a hardened washer wears thin, deforms, or is substituted with a softer equivalent, the joint can loosen prematurely, leading to mechanical play and the potential for fastener failure in service-critical locations.
Part Details
| Part Number | 13064GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Flat Washer, .625 Hardened |
Compatibility & Fitment
| Name | Model |
|---|---|
| AL5HT | AL5HT |
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-100HD | S-100HD |
| S-120HD | S-120HD |
| S-40 | S-40 |
| S-45 | S-45 |
| S-85 XC | S-85 XC |
| S-80 XC | S-80 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| S-3800 | S-3800 |
| S-3200 | S-3200 |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GS-2669BE | GS-2669BE |
| GS-3369BE | GS-3369BE |
| GS-4069BE | GS-4069BE |
| GS-2669DC | GS-2669DC |
| GS-3369DC | GS-3369DC |
| GS-4069DC | GS-4069DC |
| GS-2669RT | GS-2669RT |
| GS-3369RT | GS-3369RT |
| GS-4069RT | GS-4069RT |
| GTH-1056 | GTH-1056 |
| TZ-34/20 | TZ-34/20 |
| TZ-50/30 | TZ-50/30 |
| TZ-50 | TZ-50 |
| Z-60/34 | Z-60/34 |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-135/70 | Z-135/70 |
| Z-51/30J | Z-51/30J |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z33/18 | Z33/18 |
| Z-62/40 | Z-62/40 |
| Z-80/60 | Z-80/60 |
| Z-33 DC Power | Z-33 DC Power |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J IC | Z-45/25J IC |
| ZX-135/70 | ZX-135/70 |
| Z-30/20 N | Z-30/20 N |
| Z-34/22 IC | Z-34/22 IC |
| Z-45/22 | Z-45/22 |
| Z-34 IC | Z-34 IC |
| Z-30/20N RJ | Z-30/20N RJ |
| Z-30/20HD | Z-30/20HD |
| Z-30/20 | Z-30/20 |
| Z-45/22 MP | Z-45/22 MP |
| Z-25/8 | Z-25/8 |
| Z-20/8 | Z-20/8 |
| Z-20/8N | Z-20/8N |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
