The Genie 824145GT is a genuine OEM Flat Washer, M10, DIN125, ZAB designed for a wide range of Genie telescopic boom lifts, articulating boom lifts, scissor lifts, and GTH telehandlers. Manufactured to DIN 125 standards with a zinc-aluminum bake (ZAB) finish, this washer delivers the corrosion resistance and dimensional consistency required for dependable service in demanding jobsite conditions. As a genuine OEM component, it matches the original hardware specification exactly, ensuring proper load distribution and secure fastener seating across all compatible assemblies. Cross-reference part number 824145GT against your Genie parts manual to confirm fitment before ordering.
Key Features
- DIN 125 Dimensional Compliance — Manufactured to the DIN 125 standard, this washer meets the precise outer diameter, inner bore, and thickness tolerances required for correct load bearing in Genie structural and mechanical assemblies.
- ZAB Corrosion-Resistant Finish — The zinc-aluminum bake coating provides durable protection against rust and oxidation, helping hardware maintain its integrity through outdoor exposure and repeated service cycles.
- Direct OEM Replacement — As a genuine Genie part, this washer installs in place of the original without modification, maintaining proper fastener preload and clamping force across the assemblies it serves.
- Broad Fleet Compatibility — Fits Genie S and SX telescopic boom lifts, Z and ZX articulating boom lifts, GS rough-terrain scissor lifts, and GTH telehandlers, making it a practical stocking item for mixed Genie fleets.
- Fastener Integrity Across Critical Joints — A correctly sized and finished washer prevents fastener pull-through, distributes clamping load evenly, and reduces the risk of joint loosening under vibration — keeping structural connections secure throughout the machine's service life.
A flat washer serves as a load-distribution interface between a fastener head or nut and the mating surface it clamps against. By spreading the clamping force over a wider area, it prevents the fastener from pulling through or damaging the material beneath it, and helps maintain consistent preload even when surfaces are not perfectly uniform. On aerial lift equipment and telehandlers — where fastened joints in booms, platforms, and chassis are subject to dynamic loads and vibration — using a washer that meets the correct dimensional and material standard is essential to joint integrity. A worn, undersized, or corroded washer can allow fastener loosening over time, which may compromise the reliability of the assembly it secures.
Part Details
| Part Number | 824145GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Flat Washer, M10, DIN125, ZAB |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| SX-150 | SX-150 |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-180 | SX-180 |
| SX-135 XC | SX-135 XC |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-60 FE Hybrid | S-60 FE Hybrid |
| S-60 DC | S-60 DC |
| S-60 FE | S-60 FE |
| S-85 XC FE | S-85 XC FE |
| S-85 XC E | S-85 XC E |
| GS-2669RT | GS-2669RT |
| GS-3369RT | GS-3369RT |
| GS-4069RT | GS-4069RT |
| GTH-636 | GTH-636 |
| GTH-1056 | GTH-1056 |
| GTH-1256 | GTH-1256 |
| GTH-1044 | GTH-1044 |
| GTH-1244 | GTH-1244 |
| GTH-1544 | GTH-1544 |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 IC | Z-34/22 IC |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45 XC | Z-45 XC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
| Z-60 FE | Z-60 FE |
| Z-34 IC | Z-34 IC |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
