The Genie 824144GT is a genuine OEM Flat Washer, M8, DIN125, ZAB designed for a wide range of Genie scissor lifts, telescopic and articulating boom lifts, and GTH telehandlers. As a direct OEM replacement, this washer is manufactured to the same DIN125 dimensional standard as the original hardware used on the production line, ensuring consistent load distribution and clamping performance across every fastened joint it serves. Cross-reference part number 824144GT against your parts manual to confirm fitment for your specific machine configuration. This flat washer fits an extensive range of Genie equipment, including GS large-platform scissor lifts, S and SX telescopic booms, Z and ZX articulating booms, and GTH telehandlers.
Key Features
- DIN125 Standard Compliance — Manufactured to the DIN125 specification, delivering the correct outer diameter, inner bore, and thickness for an M8 fastener stack-up without shimming or adjustment.
- ZAB Zinc-Plated Finish — The zinc anti-corrosion coating resists rust and surface oxidation, helping the washer maintain its clamping geometry over repeated service cycles in outdoor and wet conditions.
- Genuine OEM Hardware — Sourced as a genuine Genie OEM part, this washer matches the exact material grade and plating specification called out in Genie service documentation for the 824144GT position.
- Broad Cross-Platform Fitment — A single part number covers GS large scissor lifts, S and SX telescopic booms, Z and ZX articulating booms, RL vertical mast light towers, and GTH telehandlers, making it a practical stock item for mixed Genie fleets.
- Correct Load Distribution — A properly sized flat washer spreads clamping force evenly across the mating surface, preventing bolt pull-through, surface galling, and fastener loosening under vibration — common causes of hardware-related service calls on aerial equipment.
- Safety-Critical Fastener Support — On aerial lifts and telehandlers, improperly sized or corroded washers can compromise the integrity of structural, hydraulic, and platform-mounting connections; using the specified OEM washer helps maintain the fastener joint as designed.
A flat washer serves as a load-spreading interface between a bolt head or nut and the surface being fastened. By distributing clamping force over a wider area, it prevents the fastener from pulling into or damaging the base material and helps the joint maintain its clamping load under vibration and dynamic stress. On Genie aerial lifts and telehandlers — where structural, hydraulic, and electrical assemblies are subject to continuous movement and outdoor exposure — using the correct M8 DIN125 washer in the specified position ensures the fastener joint performs as engineered. A missing, undersized, or corroded washer can allow fasteners to work loose or cause surface damage that complicates future service.
Part Details
| Part Number | 824144GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Flat Washer, M8, DIN125, ZAB |
Compatibility & Fitment
| Name | Model |
|---|---|
| RL4 Vertical Mast | RL4 Vertical Mast |
| RL4 LED Vertical Mast | RL4 LED Vertical Mast |
| S-100HD | S-100HD |
| S-120HD | S-120HD |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| SX-150 | SX-150 |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-180 | SX-180 |
| SX-135 XC | SX-135 XC |
| S-40 | S-40 |
| S-45 | S-45 |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-80 J | S-80 J |
| S-60 FE Hybrid | S-60 FE Hybrid |
| S-60 DC | S-60 DC |
| S-85 XC | S-85 XC |
| S-60 FE | S-60 FE |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-2669RT | GS-2669RT |
| GS-3369RT | GS-3369RT |
| GS-4069RT | GS-4069RT |
| GTH-844 | GTH-844 |
| GTH-1056 | GTH-1056 |
| GTH-1256 | GTH-1256 |
| GTH-1044 | GTH-1044 |
| GTH-1244 | GTH-1244 |
| GTH-1544 | GTH-1544 |
| Z-62/40 | Z-62/40 |
| Z-45/25 | Z-45/25 |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J IC Power | Z-45/25J IC Power |
| ZX-135/70 | ZX-135/70 |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 IC | Z-34/22 IC |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45 XC | Z-45 XC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
| Z-51/30J | Z-51/30J |
| Z-60 FE | Z-60 FE |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
