The Genie 33277GT is a genuine OEM Flat Washer, M8, Yellow Zinc designed for a wide range of Genie aerial lifts, telehandlers, and light towers. As a direct OEM replacement, this flat washer meets the exact material and dimensional standards Genie specifies for production, ensuring proper load distribution and surface protection wherever it is installed. Cross-reference part number 33277GT against your parts manual to confirm the correct application before ordering. This washer fits an extensive lineup including Genie S and SX telescopic boom lifts, Z and TMZ articulating boom lifts, GS scissor lifts, GTH telehandlers, and TML light towers.
Key Features
- Yellow Zinc Corrosion Protection — The yellow zinc finish provides a layer of corrosion resistance suited to outdoor and variable-weather jobsite conditions, helping the washer maintain structural integrity over its service life.
- OEM Material and Dimensional Spec — Sourced directly from Genie, this flat washer matches the M8 bore diameter, outer diameter, and thickness specified for the original assembly — no guesswork on sizing.
- Proper Load Distribution — Seats flush against mating hardware to spread clamp load evenly across the fastened joint, preventing surface deformation and fastener loosening under vibration and dynamic loads common in aerial equipment.
- Broad Cross-Family Fitment — Compatible with Genie S and Z series boom lifts, GS scissor lifts, GTH telehandlers, TMZ trailer-mounted booms, and TML light towers, making it a practical stocking part for mixed Genie fleets.
- Direct Drop-In Replacement — Installs in place of the original without modification, keeping routine maintenance and repair work moving efficiently.
- Genuine Genie OEM Part — Supplied as a genuine OEM component, backed by Genie's part quality standards and traceable to the original equipment specification.
A flat washer serves as a bearing surface between a fastener — such as a bolt head or nut — and the material being clamped. By spreading the clamping force over a larger area, it prevents the fastener from pulling through or damaging softer surfaces and helps maintain consistent clamp load in the joint. The M8 sizing and yellow zinc coating on this washer make it suited to the structural and environmental demands found throughout Genie boom lifts, scissor lifts, and telehandlers, where vibration and exposure to the elements are everyday conditions. When a washer is missing, undersized, or corroded through, joint integrity can degrade — leading to fastener loosening, surface damage, or the need for more extensive hardware repairs.
Part Details
| Part Number | 33277GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Flat Washer, M8, Yellow Zinc |
Compatibility & Fitment
| Name | Model |
|---|---|
| TML-4000 | TML-4000 |
| TML-4000N | TML-4000N |
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GS-2669BE | GS-2669BE |
| GS-3369BE | GS-3369BE |
| GS-4069BE | GS-4069BE |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GTH-844 | GTH-844 |
| GTH-1056 | GTH-1056 |
| TMZ-34/19 | TMZ-34/19 |
| TMZ-50/30 | TMZ-50/30 |
| TMZ-17/10 | TMZ-17/10 |
| Z-60/34 | Z-60/34 |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-135/70 | Z-135/70 |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-62/40 | Z-62/40 |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J IC | Z-45/25J IC |
| Z-45/22 | Z-45/22 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
