The Genie 01.4032.0004GT is a genuine OEM Lock Washer, M10, DIN127 designed for Genie GTH telehandlers across a wide range of variants and regional configurations. Sourced directly from Genie, this lock washer meets the same dimensional and material standards as the original hardware installed at the factory. This component fits an extensive range of GTH models — including the GTH-5519, GTH-4014, GTH-4018, GTH-3007, GTH-2506, and GTH-1256 series — as well as select Z-series articulating boom lifts. Cross-reference part number 01.4032.0004GT against your machine's parts manual to confirm fitment before ordering.
Key Features
- DIN127 Standard Compliance — Manufactured to the DIN127 specification, ensuring correct spring-tension geometry and bite angle for a secure M10 fastener connection.
- Genuine Genie OEM Hardware — Supplied as an original equipment part, matching the exact material grade, hardness, and surface finish of the hardware used in Genie's own assembly process.
- Broad GTH Telehandler Coverage — Fits Genie GTH telehandlers across IIIA, IIIB, AU, AF, ACF, FMS, R, and SX variants, including the GTH-5519, GTH-4014 series, GTH-4018 series, GTH-3007 series, and GTH-2506 series.
- Vibration Resistance — The hardened split-ring design bites into the mating surface under torque, resisting loosening caused by the vibration and load cycles typical of telehandler operation.
- Direct Hardware Replacement — Installs in the same position as the original washer with no rework or adaptation, restoring fastener clamp load to specification on critical joint assemblies.
- Fastener Integrity on Safety-Critical Joints — On aerial and lifting equipment, loose fasteners in structural or hydraulic assemblies can compromise machine function; using the correct OEM washer maintains joint integrity where it matters most.
A lock washer sits between a fastener's bearing surface — typically a bolt head or nut — and the mating component it secures. Its split, sprung profile applies continuous pressure against the fastener as it's tightened, preventing the nut or bolt from backing out under vibration, dynamic loading, or thermal cycling. On telehandlers like the GTH series, which operate across rough terrain and handle repeated lift-and-carry cycles, maintaining fastener clamp load is essential to keeping structural, hydraulic, and drivetrain assemblies properly secured. A missing or damaged lock washer allows fasteners to gradually loosen, which can lead to joint movement, component wear, fluid leaks, or fastener failure over time.
Part Details
| Part Number | 01.4032.0004GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Lock Washer, M10, DIN127 |
Compatibility & Fitment
| Name | Model |
|---|---|
| GTH-5519 | GTH-5519 |
| GTH-4014 IIIA | GTH-4014 IIIA |
| GTH-4014 IIIB | GTH-4014 IIIB |
| GTH-4018 IIIA | GTH-4018 IIIA |
| GTH-4018 IIIB | GTH-4018 IIIB |
| GTH-4016R IIIB | GTH-4016R IIIB |
| GTH-4018R IIIB | GTH-4018R IIIB |
| GTH-4014 AU | GTH-4014 AU |
| GTH-4018 AU | GTH-4018 AU |
| GTH-3007 IIIA | GTH-3007 IIIA |
| GTH-3007 IIIB | GTH-3007 IIIB |
| GTH-1256 AF | GTH-1256 AF |
| GTH-5021 R | GTH-5021 R |
| GTH-5021 R IIIA | GTH-5021 R IIIA |
| GTH-2506 | GTH-2506 |
| GTH-4016R IIIA | GTH-4016R IIIA |
| GTH-4018R IIIA | GTH-4018R IIIA |
| GTH-1256 | GTH-1256 |
| GTH-1544 | GTH-1544 |
| GTH-2506 AU.3 | GTH-2506 AU.3 |
| GTH-3007 | GTH-3007 |
| GTH-3007 AU.3 | GTH-3007 AU.3 |
| 3P/700-REM 4400 | 3P/700-REM 4400 |
| GTH-5519 S | GTH-5519 S |
| GTH-2506 AU.2 | GTH-2506 AU.2 |
| GTH-3007 AU.2 | GTH-3007 AU.2 |
| GTH-3007 AU-AG | GTH-3007 AU-AG |
| GTH-3512SX | GTH-3512SX |
| GTH-4010SX | GTH-4010SX |
| GTH-3007 FMS | GTH-3007 FMS |
| GTH-2506 IIIA | GTH-2506 IIIA |
| GTH-2506 IIIB | GTH-2506 IIIB |
| GTH-2506 AU | GTH-2506 AU |
| GTH-3007 ACF | GTH-3007 ACF |
| GTH-3512 ACF | GTH-3512 ACF |
| GTH-3713 SX | GTH-3713 SX |
| GTH-3713 AU | GTH-3713 AU |
| Z33/18 | Z33/18 |
| Z-33 DC Power | Z-33 DC Power |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
