The Genie 43955GT Wire Cable, 12/3 CON.TPE JKT is a genuine OEM electrical cable designed for Genie S-series telescopic boom lifts and Z-series articulating boom lifts. Sourced directly from Genie, this cable carries the same specification as the original, ensuring a correct, code-for-code match to what left the factory. It is confirmed to fit a wide range of models including the S-40, S-60, S-80, S-85, S-100, S-105, S-120, S-125, Z-30/20 N, Z-34/22 N, Z-34/22 DC, Z-34/22 Bi-Energy, Z-40/23N, Z-45/25J IC, Z-51/30J, and Z-60/34, among others. Cross-reference part number 43955GT against your machine's parts manual before ordering to confirm the correct application for your serial range.
Key Features
- Thermoplastic Elastomer Jacket Construction — The TPE jacket is engineered to resist flexing fatigue, abrasion, and exposure to oils and fluids, making it well suited to the demanding cable-routing environments found in aerial boom lifts.
- Genuine OEM Electrical Specification — As a genuine Genie part, this cable matches the original conductor count, gauge, and insulation rating exactly, so electrical continuity and circuit protection perform as the machine was designed.
- Direct Drop-In Replacement — Built to the same dimensional and connector profile as the factory-installed cable, this wire cable routes and terminates at the original attachment points without re-pinning or splicing.
- Wide Boom-Lift Fitment — Covers an extensive range of Genie S-series telescopic booms and Z-series articulating booms, from the S-40 through the S-125 and the Z-30/20 N through the Z-60/34, making it a widely applicable service part for mixed fleets.
- Electrical Integrity Supports Safe Operation — Wiring that is cracked, chafed, or degraded can cause intermittent faults in boom controls, limit switches, or safety circuits. Replacing a worn cable with this genuine part restores the signal paths that boom-lift safety systems depend on.
A wire cable in a boom lift carries electrical power and control signals between the chassis, boom sections, and platform — routing through cable carriers and anchor points that flex thousands of times over the machine's life. The 12/3 conductor configuration means three individually insulated conductors run inside a single jacketed assembly, allowing multiple circuits to share one routed cable without interference. When the jacket cracks, conductors corrode, or insulation breaks down, the result can range from intermittent control response to a complete loss of function in the affected circuit — both of which create delays and risk on any worksite. Installing a fresh genuine OEM cable restores clean, low-resistance continuity and returns the boom's electrical system to its intended operating state.
Part Details
| Part Number | 43955GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Wire Cable, 12/3 CON.TPE JKT |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80 | S-80 |
| S-85 | S-85 |
| Z-60/34 | Z-60/34 |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-51/30J | Z-51/30J |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J IC | Z-45/25J IC |
| Z-45/22 | Z-45/22 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-34 IC | Z-34 IC |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
