The Genie 43960GT is a genuine OEM Wire Cable, 16/4 CON TPE JKT designed for Genie S-series telescopic boom lifts and Z-series articulating boom lifts. Sourced directly from Genie, this cable carries the same materials, conductor configuration, and jacket specification as the original wiring built into the machine at the factory. It fits a wide range of models including the S-40, S-60 XC, S-80, S-85, Z-34/22, Z-45/25J Bi-Energy, Z-60/34, Z-80/60, Z-135/70, and many more S and Z series variants. When the original cable shows signs of cracking, chafing, or electrical fault, this part restores the circuit to proper working order without modification.
Key Features
- TPE-Jacketed Conductor Assembly — The thermoplastic elastomer jacket is flexible and resistant to abrasion and flex fatigue — critical for cable routed through boom sections that cycle repeatedly through full extension and retraction.
- Genuine OEM Genie Component — This wire cable is sourced directly from Genie, ensuring the conductor gauge, insulation rating, and jacket material match the original harness specification for part number 43960GT.
- Broad S and Z Series Coverage — Fits a wide range of Genie telescopic and articulating boom lifts, including S-40, S-60 XC, S-85, Z-45/25J, Z-60/34, Z-80/60, Z-135/70, and multiple Bi-Energy and DC variants.
- Drop-In Replacement — The cable matches the original routing path and connector configuration, allowing it to install directly in place of the worn or damaged original without re-termination or harness modification.
- Electrical System Integrity — Proper cable condition is essential to maintaining uninterrupted signal and power delivery across boom-mounted controls, sensors, and actuators. A damaged cable can cause intermittent faults or total loss of platform function.
- Safety-Critical Wiring Application — On aerial boom lifts, reliable cable continuity directly supports safe platform operation. Using a correct OEM replacement eliminates the risk of undersized or incompatible conductors that could compromise machine safety systems.
A boom lift wire cable carries electrical power and control signals from the base of the machine through the boom structure to the platform — supplying the platform controls, emergency stop circuits, and any sensors or actuators mounted at height. The 16/4 designation indicates a four-conductor cable at 16 AWG gauge, sized to handle the current demands of the circuits it serves. Because the cable flexes every time the boom moves, the jacket material and conductor stranding are chosen specifically for high-cycle flex applications; when the jacket cracks or a conductor breaks internally, the result can be erratic platform controls, fault codes, or a boom that becomes inoperable until the cable is replaced.
Part Details
| Part Number | 43960GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Wire Cable, 16/4 CON TPE JKT |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-80 | S-80 |
| S-85 | S-85 |
| S-40 | S-40 |
| S-45 | S-45 |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-135/70 | Z-135/70 |
| Z-51/30J | Z-51/30J |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
| Z-34/22 IC | Z-34/22 IC |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J IC | Z-45/25J IC |
| Z-45/22 | Z-45/22 |
| Z-60/34 | Z-60/34 |
| Z-34 IC | Z-34 IC |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
