The Genie 28131GT is a genuine OEM Wire Loom, 1.25 Dia designed for a wide range of Genie aerial equipment, including GS scissor lifts, S-series telescopic boom lifts, and Z-series articulating boom lifts. As a direct OEM replacement, this wire loom matches the original component specification, ensuring a drop-in fit without the guesswork. Cross-reference part number 28131GT against your parts manual to confirm compatibility with your specific machine configuration. Compatible models include the SX-135 XC, S-60 XC, S-65 TRAX, GS-1930, GS-5390, Z-60/34, Z-45/22, ZX-135/70, and many more across the Genie lineup.
Key Features
- Genuine OEM Construction — Manufactured to original Genie specifications, this wire loom maintains the correct 1.25-inch diameter profile that fits the factory wiring harness routing exactly as designed.
- Broad Fleet Compatibility — Fits Genie GS scissor lifts, S and SX telescopic boom lifts, and Z and ZX articulating boom lifts, covering a wide cross-section of the Genie aerial equipment range.
- Secure Wire Organization — Keeps wiring harnesses bundled and protected from abrasion, pinching, and vibration that occur during machine travel and platform movement.
- Electrical System Integrity — A damaged or missing wire loom exposes harness conductors to chafing and moisture ingress, which can cause shorts, fault codes, or intermittent control failures. This part restores that protection layer.
- Direct Replacement Installation — Designed to route and retain the same wire paths as the original, so installation follows the existing harness layout without rerouting or adapting.
- Operational Safety — On aerial lifts, wiring failures can affect platform controls, safety interlocks, and drive functions. Keeping the harness properly protected is a straightforward step in maintaining the machine's safe operation.
A wire loom is a protective sleeve or conduit that bundles and shields the machine's electrical wiring harnesses from mechanical damage, heat, and environmental exposure. On aerial lift equipment, wiring runs through areas subject to continuous flexing, vibration, and contact with structural components — conditions that wear through unprotected insulation over time. When the loom cracks, splits, or goes missing entirely, exposed wires become vulnerable to shorts and open circuits that can affect everything from drive and steer functions to platform controls and safety systems. Replacing a worn loom with the correct Genie OEM part restores the harness protection designed into the machine from the factory.
Part Details
| Part Number | 28131GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Wire Loom, 1.25 Dia |
Compatibility & Fitment
| Name | Model |
|---|---|
| SX-135 XC | SX-135 XC |
| S-60 XC | S-60 XC |
| S-65 XC | S-65 XC |
| S-60 | S-60 |
| S-65 | S-65 |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GS-4047 | GS-4047 |
| GS-1530 | GS-1530 |
| GS-1532 | GS-1532 |
| GS-1930 | GS-1930 |
| GS-1932 | GS-1932 |
| GS-4046 | GS-4046 |
| GS-2646 AV | GS-2646 AV |
| GS-2646 AV35 | GS-2646 AV35 |
| Z-60/34 | Z-60/34 |
| Z-51/30J | Z-51/30J |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
| Z-45/22 | Z-45/22 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
