The Bomag 07321220 Countersunk Screw is a genuine OEM fastener designed for Bomag BF-series pavers and BW-series tandem rollers. As a direct OEM replacement, this countersunk screw delivers the exact threading, head geometry, and material specification required by Bomag's engineering design. This part is confirmed to fit a wide range of Bomag pavers — including BF 300, BF 600, and BF 700 models — as well as BW 80 AD-2, BW 90 AD-2, BW 100 AD-5, BW 120 AD-5, and other tandem rollers in the BW lineup. Sourcing part number 07321220 directly through DHS Equipment ensures you receive an authentic Bomag component that meets original assembly requirements.
Key Features
- Genuine OEM Fastener Integrity — Manufactured to Bomag's original thread class, head angle, and hardness grade, ensuring the same clamp load and seating depth as the factory-installed screw.
- Flush-Seating Countersunk Profile — The countersunk head design seats flush with mating surfaces, eliminating protrusion that could interfere with adjacent components or assemblies during operation.
- Broad Paver and Tandem Roller Coverage — Fits BF 300, BF 600, and BF 700 paver variants including S340, S 500 configurations, plus BW 80, BW 90, BW 100, and BW 120 tandem rollers.
- Consistent Torque and Retention — Correct thread engagement prevents fastener loosening under vibration loads typical of paving and compaction cycles, maintaining structural integrity of the assembly.
- Direct OEM Replacement — Part number 07321220 matches the original Bomag specification exactly, dropping into the same position without rework or modification to the surrounding hardware.
A countersunk screw is a threaded fastener with a tapered head designed to sit flush with — or below — the surface of the material it secures. In equipment assemblies, flush-head fasteners are used wherever a protruding head would interfere with moving parts, panels, or mating surfaces. When a countersunk screw is worn, stripped, or missing, the joint it secures can work loose under vibration, leading to misalignment, rattling, or accelerated wear of the components it holds in place. Replacing a damaged screw with the correct OEM part restores the fastener's full clamping strength and ensures the assembly behaves as Bomag designed it to.
Part Details
| Part Number | 07321220 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Countersunk Screw |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Paver | BF 300 P S340 V | 00800711, 00824189 |
| Paver | BF 300 P S340 TV | 00800715, 00824187 |
| Paver | BF 300 C S340 TV | 00800717, 00824191 |
| Paver | BF 300 P S340-2 TV | 00800755, 00800759, 00800817 |
| Paver | BF 300 C S340-2 TV | 00800757, 00800761 |
| Paver | BF 300 P S340-2 V | 00800763, 00800767 |
| Paver | BF 300 C S340-2 V | 00800769 |
| Paver | BF 300 C-2 S340-2 TV | 00800809, 00825649 |
| Paver | BF 300 P-2 S340-2 TV | 00800811, 00825651 |
| Paver | BF 300 P-2 S340-2 V | 00800815 |
| Paver | BF 600 P-2 S 500 | 00800865, 00825913 |
| Paver | BF 700 C-2 S 600 | 00800867 |
| Paver | BF 700 C-2 S 500 | 00800869 |
| Tandem Roller | BW 80 AD-2 | 00810280, 00817566 |
| Tandem Roller | BW 90 AD-2 | 00810281, 00817569, 00818041, 00818507 |
| Tandem Roller | BW 100 ADM-2 | 00817459 |
| Tandem Roller | BW 80 ADS | 00817567, 00818513 |
| Tandem Roller | BW 90 AC-2 | 00817568, 00818045 |
| Tandem Roller | BW 100 AD-5 | 00824029 |
| Tandem Roller | BW 120 AC-5 | 00824031 |
| Tandem Roller | BW 120 AD-5 | 00824033 |
| Tandem Roller | BW 100 AC-5 | 00824275 |
| Paver | BF 300 C-2 S340-2 V | 00825653 |
| Paver | BF 600 C-2 S 600 | 00825903 |
| Paver | BF 600 P-2 S 600 | 00825915 |
| Paver | BF 600 P-3 S 500 | 00826343, 00826971 |
| Paver | BF 700 C-3 S 500 | 00826351 |
| Paver | BF 800 C-3 S 600 | 00826407 |
| Paver | BF 700 C-3 S 600 | 00827127 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
