The Wacker Neuson is a genuine OEM Idle Jet designed for a broad range of Wacker Neuson equipment, including PT2 and PDT2/PDT3 trash and diaphragm pumps, CT36-6 concrete trowels, GP2600 portable generators, PG2 and PG3 dewatering pumps, VP and WP series single-direction vibratory plate compactors, BPU2540 reversible vibratory plates, and BFS series floor saws. Sourced directly from Wacker Neuson, this genuine OEM part is manufactured to the same specification as the original component installed at the factory. With one part number spanning such a wide range of equipment families, the is a smart stocking item for service shops and fleet operators running mixed Wacker Neuson equipment. Confirm your model and machine number against the fitment list before ordering to ensure correct application.
Key Features
- Calibrated Fuel Metering Orifice — Manufactured to the exact orifice size of the original jet, ensuring the correct air-fuel mixture at idle for smooth, stable low-speed engine operation.
- Genuine OEM Part — Supplied by Wacker Neuson as a genuine OEM component; same part used on the production line across all listed equipment families.
- Direct Carburetor Replacement — Threads directly into the carburetor body on all compatible models with no reworking of the fuel circuit required.
- Wide Cross-Family Fitment — A single part number covers PT2 trash pumps, CT36-6 trowels, GP2600 generators, VP/WP vibratory plates, BPU2540 reversible plates, BFS floor saws, PDT/PDI diaphragm pumps, and PG dewatering pumps.
- Restores Clean Idle Behavior — A worn or clogged idle jet causes rough idling, stalling at low throttle, and hard starting; replacing it with the correct OEM jet restores consistent low-speed fuel delivery.
- Fuel System Integrity — As a precision carburetor component, using the correctly sized OEM jet prevents over-rich or over-lean conditions that can cause engine damage or unburned fuel discharge.
The idle jet is a small, precision-metered orifice fitted inside the carburetor that controls the amount of fuel delivered to the engine at idle and low throttle speeds. When the throttle is closed or nearly closed, the main jet circuit is largely inactive, and the engine draws fuel almost entirely through the idle circuit — making the idle jet critical to smooth, stable low-speed running. Over time, idle jets can become partially or fully blocked by varnish deposits from stale fuel or by fine particulate contamination, resulting in rough idling, engine stalling, hesitation on acceleration, or a refusal to start. Replacing the idle jet with the correct OEM-spec 5000156537 restores proper fuel metering and returns the carburetor to its intended operating balance.
Part Details
| Part Number | 5000156537 |
|---|---|
| Old Part Number | 0156537 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Idle Jet |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT2 Pump | PT2 | 5000009318, 5000009319, 5000009320 |
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| Premium Portable Generator | GP2600 | 5000620088, 5000620116 |
| 50mm/2in Diaphragm Trash Pump | PDT2 | 5000009494, 5000620770 |
| 75mm/3in Diaphragm Trash Pumps | PDT3 | 5000009495, 5000620774 |
| PG2 Dewatering Pump | PG2 | 5000009496, 5000009497 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| Value Vibratory Plate, 11kN, 3 50mm/13.8in | VP1135R | 5000008709, 5000009071, 5000630061 |
| Value Vibratory Plate, 11 kN, 356mm/14in | VP1135RW | 5000009251, 5000009512 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| Vibratory Soil Plate, 60 kN | VP60X | 5000009533 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| Vibratory Soil Plate, 50 kN | VP50X | 5000009531 |
| Single Direction Plate | VPR70 | 5000006909 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000630018, 5000009547, 5000630066 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630020, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| VP50Xw-VIBROPLATE | VP50Xw | 5000630094 |
| VP60Xw-VIBROPLATE | VP60Xw | 5000630095 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| WP 2050W | WP2050W | 5000630023 |
| WPP 1540W | WPP1540W | 5000630027 |
| WPP 1550W | WPP1550W | 5000630031 |
| WPP 1550Ww | WPP1550Ww | 5000630032 |
| Single Direction Plate | AP1135R | 5000009518 |
| WPP 1540Ww | WPP1540Ww | 5000630028 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| Value Vibratory Plate, 11kN 356mm/14in | VP1135R-AU | 5000630102 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Single Direction Plate | WP1550Ww | 5000630113 |
| Single Direction Plate | WP2050Ww | 5000630116 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| Floor Saw | BFS 12 | 5000630092 |
| Single Direction Plate | WP1540Ww | 5000630111 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saws | BFS 614B | 5000009526 |
| 50mm/2in Diaphragm Trash Pump | PDI2 | 5000009489 |
| 75mm/3in Diaphragm Trash Pump | PDI3 | 5000009491, 5000009492 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
