The Wacker Neuson is a genuine OEM Idle Jet designed for a broad range of Wacker Neuson equipment, including PT2 and PDT series pumps, CT36-6 concrete trowels, GP2600 portable generators, VP and WP series single-direction vibratory plates, BPU reversible vibratory plates, and BFS floor saws. As a direct factory part, the is manufactured to the exact carburetor specifications required across all compatible models, ensuring the fuel-to-air calibration your engine depends on is never compromised. This genuine OEM component is sourced directly from Wacker Neuson, giving you confidence that it will seat, seal, and perform exactly as the original part did. Confirm your model number before ordering to take full advantage of this part's wide cross-model compatibility.
Key Features
- Carburetor-Matched Orifice Size — Manufactured to the exact bore diameter specified by Wacker Neuson, ensuring correct fuel metering at idle and preventing rich or lean running conditions.
- Genuine OEM Part — Sourced directly from Wacker Neuson; carries the same part number (5000156537) and specification as the component installed at the factory.
- Wide Cross-Model Coverage — A single part fits VP and WP vibratory plate compactors, PT2 and PDT trash and diaphragm pumps, CT36-6 trowels, GP2600 generators, BFS floor saws, PG dewatering pumps, and BPU reversible plates.
- Stable Idle Restoration — A worn or clogged idle jet causes rough idling, stalling, and hard starts; replacing it restores smooth, consistent low-speed engine operation across all fitment models.
- Drop-In Carburetor Fit — Threaded to match the original carburetor body; installs without modification using standard hand tools during routine carburetor service.
- Fuel System Integrity — Using the correct OEM-spec jet prevents fuel delivery imbalances that can lead to engine flooding, excessive emissions, or accelerated wear on carburetor components.
The idle jet is a small, precision-threaded brass metering component located inside the carburetor. Its job is to control the exact amount of fuel delivered to the engine during low-speed and idle operation, working alongside the main jet to keep the fuel-to-air mixture within the narrow range the engine needs to run smoothly. When an idle jet becomes clogged with varnish or debris — common after extended storage or use of stale fuel — the engine will idle roughly, stall frequently, or refuse to start without excessive choke. Replacing the idle jet with a correctly sized OEM part like the Wacker Neuson 5000156537 is a straightforward carburetor service step that restores stable low-speed performance and avoids unnecessary teardown of other engine components.
Part Details
| Part Number | 5000156537 |
|---|---|
| Old Part Number | 0156537 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Idle Jet |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT2 Pump | PT2 | 5000009318, 5000009319, 5000009320 |
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| Premium Portable Generator | GP2600 | 5000620088, 5000620116 |
| 50mm/2in Diaphragm Trash Pump | PDT2 | 5000009494, 5000620770 |
| 75mm/3in Diaphragm Trash Pumps | PDT3 | 5000009495, 5000620774 |
| PG2 Dewatering Pump | PG2 | 5000009496, 5000009497 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| Value Vibratory Plate, 11kN, 3 50mm/13.8in | VP1135R | 5000008709, 5000009071, 5000630061 |
| Value Vibratory Plate, 11 kN, 356mm/14in | VP1135RW | 5000009251, 5000009512 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| Vibratory Soil Plate, 60 kN | VP60X | 5000009533 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| Vibratory Soil Plate, 50 kN | VP50X | 5000009531 |
| Single Direction Plate | VPR70 | 5000006909 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000630018, 5000009547, 5000630066 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630020, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| VP50Xw-VIBROPLATE | VP50Xw | 5000630094 |
| VP60Xw-VIBROPLATE | VP60Xw | 5000630095 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| WP 2050W | WP2050W | 5000630023 |
| WPP 1540W | WPP1540W | 5000630027 |
| WPP 1550W | WPP1550W | 5000630031 |
| WPP 1550Ww | WPP1550Ww | 5000630032 |
| Single Direction Plate | AP1135R | 5000009518 |
| WPP 1540Ww | WPP1540Ww | 5000630028 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| Value Vibratory Plate, 11kN 356mm/14in | VP1135R-AU | 5000630102 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Single Direction Plate | WP1550Ww | 5000630113 |
| Single Direction Plate | WP2050Ww | 5000630116 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| Floor Saw | BFS 12 | 5000630092 |
| Single Direction Plate | WP1540Ww | 5000630111 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saws | BFS 614B | 5000009526 |
| 50mm/2in Diaphragm Trash Pump | PDI2 | 5000009489 |
| 75mm/3in Diaphragm Trash Pump | PDI3 | 5000009491, 5000009492 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
