The Multiquip 66437 Hydraulic Hose 3/8" x 980MM with 45 Degree is a genuine OEM hydraulic hose designed for the RW-702 RAMMAX walk-behind roller. As a direct Multiquip OEM component, 66437 is manufactured to the exact length, diameter, and end-fitting angle required by the RW-702 hydraulic system — no guesswork, no adapters. This hose ensures proper hydraulic fluid routing between system components, keeping the roller's drive and vibration circuits operating at the pressures and flow rates the machine was engineered for.
Key Features
- OEM-Spec Hose Construction — Built to exact pressure rating and burst-strength requirements for hydraulic circuits on the RW-702, ensuring the hose handles operating loads without seeping or failing under pressure.
- Pre-Formed 45-Degree End Fitting — The 45-degree angled fitting is factory-formed to route cleanly into the RW-702's tight hose routing paths, allowing a direct, secure connection without bending or stressing adjacent lines.
- Correct 3/8" Bore at 980MM Length — Matched internal diameter and cut length mean this hose seats fully into OEM fittings and reaches between connection points without slack or tension.
- Confirmed Fitment for RW-702 — Sourced and validated for the RAMMAX RW-702 walk-behind roller; part number 66437 cross-references directly to this machine's parts documentation.
- Hydraulic Circuit Integrity — A worn or leaking hydraulic hose can cause loss of drive force, erratic vibration output, or complete hydraulic failure; replacing with the correct OEM hose restores full system pressure and machine control.
A hydraulic hose carries pressurized fluid between the pump, control valves, and actuators that drive the roller's travel and vibration functions. On a walk-behind roller like the RW-702, the hydraulic system is the backbone of both propulsion and compaction performance — if a hose degrades, cracks, or develops a leak, fluid pressure drops and the machine loses the force needed to compact effectively. Replacing a failed hose with the correct OEM part, matched to the right bore, length, and fitting angle, restores system integrity and keeps the machine performing to its designed compaction output.
Part Details
| Part Number | 66437 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Hydraulic Hose 3/8" x 980MM with 45 Degree |
Compatibility & Fitment
| Name | Model |
|---|---|
| RW-702 | RW-702 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
Multiquip
Multiquip 66972 Hydraulic Hose 3/8" x 2160MM with 45 Degree
Multiquip