The Multiquip 66972 is a genuine OEM Hydraulic Hose 3/8" x 2160MM with 45 Degree fitting designed for the RW-1800 series RAMMAX roller. As a direct Multiquip OEM component, 66972 is manufactured to the exact dimensions and pressure ratings required by the RW-1800 hydraulic system. The pre-formed 45-degree end fitting ensures the hose routes correctly within the machine's hydraulic circuit without stress or improvised bending. Sourced directly through authorized Multiquip supply channels, this part ships as a ready-to-install replacement.
Key Features
- OEM Hydraulic Rating — Built to the exact pressure capacity and inner diameter spec required by the RW-1800 hydraulic circuit, so flow and system pressure are maintained throughout the hose's service life.
- Pre-Formed 45-Degree End Fitting — The angled fitting matches the original routing geometry of the RW-1800, allowing the hose to seat correctly at connection points without additional adapters or rerouting.
- Correct Length at 2160MM — Manufactured to the precise 2160MM length specified for this application, eliminating slack or tension that can accelerate wear at fittings and connectors.
- Confirmed Fitment for RW-1800 — Part 66972 is verified for the Multiquip RW-1800 RAMMAX roller, giving you confidence that this is the correct hydraulic hose for your machine.
- Hydraulic Integrity Under Load — A worn or cracked hydraulic hose causes pressure loss, sluggish roller response, and potential fluid leaks; replacing with a genuine OEM hose restores full hydraulic performance.
- Fuel and Fluid Safety Compliance — Hydraulic hose integrity is critical to safe machine operation; using the correct OEM-spec hose prevents unexpected failures under working pressure on the jobsite.
A hydraulic hose carries pressurized hydraulic fluid between the pump, control valves, and actuators that drive the RW-1800 roller's propulsion and vibration systems. When a hose is in good condition, hydraulic pressure is delivered consistently, keeping the roller responsive and operating at full compaction capacity. A hose that is cracked, kinked, or degraded will bleed pressure from the system, resulting in sluggish or inconsistent machine behavior, potential fluid contamination, and in severe cases a complete loss of hydraulic function until the hose is replaced.
For fitment questions or help confirming this part is correct for your machine, contact the DHS Equipment parts team for assistance.
Part Details
| Part Number | 66972 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Hydraulic Hose 3/8" x 2160MM with 45 Degree |
Compatibility & Fitment
| Name | Model |
|---|---|
| RW-1800 | RW-1800 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
Multiquip
Multiquip 66437 Hydraulic Hose 3/8" x 980MM with 45 Degree
Multiquip